View source for Talk:Configure or flash FPGA ?

there is a small issue, onfiguring and flashin seem to to the same thing, and they are different:

Configure FPGA : At power on, the FPGA is not configured. FPGA configuration 
  ***is the action of transfering the bitstream from the processor RAM to the FPGA***.
Flash FPGA : It is possible to save the FPGA configuration under the Flash memory of the APF. Flashing FPGA 
  ***is the action of transfering the bitstream from the processor RAM to the FPGA. ***

somewhere "to" should be substituted into "from" and "from" into "to"?