View source for Connection with U-Boot under Windows

==RS232 configuration for Window$==
Instead of using the Hyperterminal (too many bugs), we suggest to use a free software named Tera Term Pro .

===Terminal installation===  
Donwload (http://www.ayera.com/teraterm/) and install TeraTerm on your PC.

===Terminal configuration===  
* Select serial connection on the first top window when opening TeraTerm
* Select your COM port
* In the "Setup" menu under "Serial port", modify the connection speed to 115200 (Default for uBoot)

===Terminal file transfer configuration===  
* In the "File" menu, select "Transfer" , then "Kermit" then "Send"
If the Armadeus board is waiting for a kermit transfer, the file will be sent immediately

==Ethernet TFTP server for Window$==
In order to send your files (uBoot, Linux, rootfs ...) with higher speed to the armadeus board, you can use a tftp server.
Once the server started, the files located in the server shared directory (or current directory) will be accessible to the TFTP client (like an armadeus board).

===TFTP server installation===  
Donwload (http://tftpd32.jounin.net/) and install Tftpd32 on your PC (Host).

===Server configuration===  
* Select the directory in which the files you want to sent to the Armadeus board are located ("Browse" button)
* Set the server address if necessary (must be your Host IP address)
If the Armadeus board has been correctly configured (host address, netmask ...) the transfer will start immediately.