Difference between revisions of "Development boards power supply"
From ArmadeusWiki
m |
|||
| Line 17: | Line 17: | ||
===DevLight & DevFull=== | ===DevLight & DevFull=== | ||
* Use +6V DC to +16V DC input voltage | * Use +6V DC to +16V DC input voltage | ||
| − | |||
===PPS=== | ===PPS=== | ||
* Use +8V DC to +24V DC input voltage | * Use +8V DC to +24V DC input voltage | ||
| + | * or USB OTG connector (J3) | ||
==APF51== | ==APF51== | ||
Revision as of 09:08, 12 October 2011
 |
Warning: For all development boards: + is in the middle of the connector, - on the side. Use a regulated power supply capable of providing at least 500mA at minimum required voltage. |
Contents
APF9328
DevLight V1
- Use +5V DC to +9V DC input voltage
DevLight V2
- Use +5V DC to +7V DC input voltage
DevFull
- Use +7V DC to +24V DC input voltage
APF27
DevLight & DevFull
- Use +6V DC to +16V DC input voltage
PPS
- Use +8V DC to +24V DC input voltage
- or USB OTG connector (J3)
APF51
APF51Dev
- Use +8V DC to +28V DC input voltage (standard DC jack input)
- or Li-Po/Li-ion batterie (3.7 or 3.6V) input (J11). Some peripherals will not be powered (please see APF51Dev Datasheet for details)
- or USB OTG connector (J3). In this case some peripherals will not be powered (please see APF51Dev Datasheet for details)
