Difference between revisions of "Ethernet console"
From ArmadeusWiki
(links) |
m |
||
| Line 1: | Line 1: | ||
| − | On this page you will learn how to move the default | + | On this page you will learn how to move the default RS-232 console to Ethernet. This might be useful in systems where you want to use the RS-232 port for something else or if you want a remote console. |
{{Under_Construction}} | {{Under_Construction}} | ||
Revision as of 22:09, 7 March 2012
On this page you will learn how to move the default RS-232 console to Ethernet. This might be useful in systems where you want to use the RS-232 port for something else or if you want a remote console.
Page under construction...
Informations on this page are not guaranteed !!
U-Boot
- modify the config header file for your board and add it:
#define CONFIG_NETCONSOLE 1
- recompile and reflash your U-Boot:
$ make u-boot-clean $ make
- redefine some environment variables (here 192.168.1.2 is the IP address of my Host PC):
BIOS> setenv ncip 192.168.1.2 BIOS> setenv stdin nc; setenv stdout nc; setenv stderr nc
Linux
TDBL
