Difference between revisions of "Serial Transfer"
(→Usage) |
(→Installation) |
||
| Line 9: | Line 9: | ||
==Installation== | ==Installation== | ||
| − | + | ===Target (APF)=== | |
Modify your Buildroot configuration: | Modify your Buildroot configuration: | ||
<pre class="host"> | <pre class="host"> | ||
| Line 28: | Line 28: | ||
Reflash it or manually copy ''rz'' and ''sz'' executables found in ''$ARMADEUS_ROOTFS_DIR/usr/bin/''. | Reflash it or manually copy ''rz'' and ''sz'' executables found in ''$ARMADEUS_ROOTFS_DIR/usr/bin/''. | ||
| − | + | ===Host=== | |
| − | Install lrzsz package, if not already installed on your system. For example on Ubuntu/Debian: | + | * Install lrzsz package, if not already installed on your system. For example on Ubuntu/Debian: |
| + | <pre class="host"> | ||
$ sudo apt-get install lrzsz | $ sudo apt-get install lrzsz | ||
| + | </pre> | ||
| + | * Install minicom tool: | ||
| + | <pre class="host"> | ||
| + | $ sudo apt-get install minicom | ||
| + | </pre> | ||
| + | * The first time, configure minicom (as root): | ||
| + | <pre class="host"> | ||
| + | $ sudo minicom -s | ||
| + | </pre> | ||
==Usage== | ==Usage== | ||
Revision as of 12:00, 6 February 2013
Instructions to use the serial port of your Armadeus board to transfer files from/to your PC.
 |
Note: This page explains how to transfer files on the board when the Linux system has started, not from U-Boot !.
To know how to configure serial link for U-Boot communication, it's here. |
Contents
Introduction
When you only have a serial link (RS232/USB) as connection with your devt PC (ie no Ethernet available), then you can use Zmodem protocol to send/receive files to/from your Shell/Console of your Armadeus board.
Installation
Target (APF)
Modify your Buildroot configuration:
$ make menuconfig
to add lrzsz package:
[*] lrzsz
and then rebuild your rootfs:
$ make
Reflash it or manually copy rz and sz executables found in $ARMADEUS_ROOTFS_DIR/usr/bin/.
Host
- Install lrzsz package, if not already installed on your system. For example on Ubuntu/Debian:
$ sudo apt-get install lrzsz
- Install minicom tool:
$ sudo apt-get install minicom
- The first time, configure minicom (as root):
$ sudo minicom -s
Usage
 |
Warning: You must use minicom as serial terminal and not kermit for the moment sorry ! :-( |
Be sure to have correctly configured Minicom (line speed, 8N1, no flow control, and correct download/upload directories path).
After having booted your board:
- On your Target, open a new terminal on your serial link (here USB):
# /sbin/getty -L ttygserial 115200 vt100
- On your Host, launch Minicom and configure it to use /dev/ttyUSB1 at 115200, then connect it to this terminal
- Use rz for receiving and sz to send files:
Host --> Target
# cd /whereToPutTheFileOnTheTarget/ # rz -bZ .. waiting to receive.
then in minicom do: Ctrl+A , s and choose zmodem protocol and the file to send.
Wait a little and your file will be copied to your board rootfs ! ;-)
Target --> Host
# cd /whereIsTheFileToSendOnTheTarget/ # sz -b --zmodem filename
Minicom handles the file receiving automatically (and put it in your $HOME by default)
