Difference between revisions of "Ethernet console"
From ArmadeusWiki
m |
(→U-Boot) |
||
| Line 10: | Line 10: | ||
* recompile and reflash your U-Boot: | * recompile and reflash your U-Boot: | ||
<pre class="host"> | <pre class="host"> | ||
| − | $ make u-boot- | + | $ make u-boot-rebuild |
| − | + | ||
</pre> | </pre> | ||
* redefine some environment variables (here 192.168.1.2 is the IP address of my Host PC): | * redefine some environment variables (here 192.168.1.2 is the IP address of my Host PC): | ||
Revision as of 14:07, 19 September 2013
On this page you will learn how to move the default RS-232 console to Ethernet. This might be useful in systems where you want to use the RS-232 port for something else or if you want a remote console.
Page under construction...
Informations on this page are not guaranteed !!
U-Boot
- modify the config header file for your board and add it:
#define CONFIG_NETCONSOLE 1
- recompile and reflash your U-Boot:
$ make u-boot-rebuild
- redefine some environment variables (here 192.168.1.2 is the IP address of my Host PC):
BIOS> setenv ncip 192.168.1.2 BIOS> setenv stdin nc; setenv stdout nc; setenv stderr nc
Linux
TDBL
