Difference between revisions of "How to use vanilla kernel on APF27"

Revision as of 14:55, 17 January 2014

By default, the kernel for APF27 is the 2.6.29.6. Migration for the kernel upstream is in progress but not finished, and some features like CAN or GPIOlib interrupts management are not available under kernel 2.6.29. This article explain how to use a recent kernel with latest armadeus trunk on APF27.

With recent kernel it is also important to know how to use kernel device tree

mainline target

• Get the latest trunk version with command :

$ git clone git://git.code.sf.net/p/armadeus/code armadeus-trunk

• Configure the BSP for APF27 "mainline" :

$ cd armadeus-trunk
$ make apf27mainline_defconfig

• Update your board:

First time only:

BIOS> run update_uboot; reset
BIOS> run flash_reset_env; reset

Each time you switch from 2.6.29.6 to mainline:

BIOS> run update_dtb
BIOS> run update_kernel
BIOS> run update_rootfs

BIOS> setenv fdt_addr_r 0xa1000000
BIOS> setenv consoledev ttymxc0
BIOS> saveenv

• Framebuffer can support multiple LCDs and so LCD you want to use must be passed as bootparam (like serial port). So you can do (for example):

BIOS> setenv console console=ttymxc0,115200 video=imxfb:Chimei-LW700AT9003

Evolution of migration

See Kernel-upstream-status to know the status of kernel migration.