Difference between revisions of "Quartus installation on Linux"
From ArmadeusWiki
(→Links) |
m (→Introduction) |
||
| Line 1: | Line 1: | ||
== Introduction == | == Introduction == | ||
| − | [http://www.altera.com/products/software/quartus-ii/web-edition/qts-we-index.html Quartus web edition] is the software used to synthesize bitstream for Altera FPGAs. It's required for the cyclone V soldered on APF6SP. | + | [http://www.altera.com/products/software/quartus-ii/web-edition/qts-we-index.html Quartus web edition] is the software used to synthesize bitstream for Altera FPGAs. It's required for the cyclone V soldered on [[APF6SP]]. |
== Installation guide == | == Installation guide == | ||
Revision as of 12:51, 24 December 2014
Contents
Introduction
Quartus web edition is the software used to synthesize bitstream for Altera FPGAs. It's required for the cyclone V soldered on APF6SP.
Installation guide
Package needed
On debian jessie :
sudo apt-get install libstdc++5 libmotif4 libxp6 libcurl3
Download
Download the big (4GB) quartus installer here(clic on download software web edition button).
Uncompress and install
- Untar the archive :
tar -xvf Quartus-web-14.0.0.200-linux.tar
- run the installer:
bash setup.sh
- follow the instructions to install it where you want.
configure .bashrc
Adding the path of your quartus in ~/.bashrc
export ALTERAPATH="/opt/quartus/altera/14.0/"
export ALTERAOCLSDKROOT="${ALTERAPATH}/hld"
export QUARTUS_ROOTDIR=${ALTERAPATH}/quartus
export QUARTUS_ROOTDIR_OVERRIDE="$QUARTUS_ROOTDIR"
export PATH=$PATH:${ALTERAPATH}/quartus/bin
export PATH=$PATH:${ALTERAPATH}/nios2eds/bin
export PATH=$PATH:${ALTERAPATH}/modelsim_ase/bin
export PATH=$PATH:${ALTERAPATH}/quartus/bin
export PATH=$PATH:${ALTERAPATH}/nios2eds/bin
Launch Quartus
To launch quartus, open a terminal and simply type :
$ quartus
