Difference between revisions of "APF6 EMMC"
From ArmadeusWiki
(→User Data partition layout) |
(→User Data partition layout) |
||
| Line 59: | Line 59: | ||
|- style="background:#efefef;" align="center" | |- style="background:#efefef;" align="center" | ||
!Name || U-Boot device || Linux device || Offset (blocks) || Size || Comment | !Name || U-Boot device || Linux device || Offset (blocks) || Size || Comment | ||
| + | |---------------- | ||
| + | |... || NA || NA || 0 || 1 MBytes (2048 blocks) || Free | ||
|---------------- | |---------------- | ||
|Boot || mmc 0:1 || /dev/mmcblk2p1 || 2048 (0x800) || 24 MBytes (49152 blocks) || The kernel and the device tree (inside a ''dtbs/'' directory) are on this partition (ext4 formatted) | |Boot || mmc 0:1 || /dev/mmcblk2p1 || 2048 (0x800) || 24 MBytes (49152 blocks) || The kernel and the device tree (inside a ''dtbs/'' directory) are on this partition (ext4 formatted) | ||
Revision as of 14:33, 21 January 2015
APF6 eMMC layout
By default, the 4GB eMMC on APF6 board has 4 physical/hardware partitions:
| Boot0 | Boot1 | RPMB | User Data |
| Name | U-Boot name | Size | Comment |
|---|---|---|---|
| boot0 | mmc dev 0 1 | 2MBytes | U-Boot is installed on this partition |
| boot1 | mmc dev 0 2 | 2MBytes | Not used |
| rpmb | mmc dev 0 3 | 512KBytes | Not used |
| User Data | mmc dev 0 0 | remaining space | Kernel, device tree and rootfs |
Boot0 partition layout
| Offset (blocks) | Offset (bytes) | Comment |
|---|---|---|
| 0 | 0 | |
| 0x02 | 1 KB | U-Boot SPL (apf6-u-boot.spl) |
| 0x8a | 69 KB | U-Boot IMG (apf6-u-boot.img) |
| 512 KB | ||
| 1024 KB | U-Boot environment | |
| 1536 KB | Redundant U-Boot environment |
User Data partition layout
There are two primary partitions on the "User Data" physical partition:
| ... | Boot | Rootfs |
| Name | U-Boot device | Linux device | Offset (blocks) | Size | Comment |
|---|---|---|---|---|---|
| ... | NA | NA | 0 | 1 MBytes (2048 blocks) | Free |
| Boot | mmc 0:1 | /dev/mmcblk2p1 | 2048 (0x800) | 24 MBytes (49152 blocks) | The kernel and the device tree (inside a dtbs/ directory) are on this partition (ext4 formatted) |
| Rootfs | mmc 0:2 | /dev/mmcblk2p2 | (0x18800) | Rest of space (<3816448 blocks) | the rootfs is on this partition (ext4 formatted) |
- By default rootfs is only occupying the size of the .ext4 image flashed with U-Boot. If you want to increase the rootfs available free space then, after Linux has booted, use the following command:
# resize2fs /dev/mmcblk2p2
Rootfs will then be extended to all the "Rootfs" eMMC partition space.
