Difference between revisions of "U-Boot-2015.01"

From ArmadeusWiki
Jump to: navigation, search
(add apf6)
(apf51: tests passed)
 
(10 intermediate revisions by the same user not shown)
Line 67: Line 67:
 
|----------------
 
|----------------
 
|'''Ethernet driver'''  
 
|'''Ethernet driver'''  
−
| style="background:#ffff00;" | dm9000
+
| style="background:#00ff00;" | dm9000
 
| style="background:#00ff00;" | FEC0  
 
| style="background:#00ff00;" | FEC0  
−
| style="background:#ffff00;" | FEC  
+
| style="background:#00ff00;" | FEC  
−
| style="background:#ffff00;" | FEC  
+
| style="background:#00ff00;" | FEC  
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| startup sceen shall display:<br />Net:  <DRIVER>
 
| startup sceen shall display:<br />Net:  <DRIVER>
 
|----------------
 
|----------------
 
|'''Ethernet MAC'''  
 
|'''Ethernet MAC'''  
−
| style="background:#ffff00;" | dm9000 read<br />00000000: 1e00 00ac
+
| style="background:#00ff00;" | dm9000 read<br />00000000: 1e00 00ac
 
| style="background:#00ff00;" | bdinfo<br />...<br />ethaddr    = 00:1e:ac:...  
 
| style="background:#00ff00;" | bdinfo<br />...<br />ethaddr    = 00:1e:ac:...  
−
| style="background:#ffff00;" | bdinfo<br />...<br />ethaddr    = 00:1e:ac:...  
+
| style="background:#00ff00;" | bdinfo<br />...<br />ethaddr    = 00:1e:ac:...  
−
| style="background:#ffff00;" | iim read fecmac<br />FEC MAC address: 0x00:0x1e:0xac:…
+
| style="background:#00ff00;" | fuse read 1 9 6<br />...Word 0x00000009: 00000000 0000001e 000000ac ...
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| test the presence of the MAC address in EEPROM/fuses <br /> the command bdinfo should return a valid mac address
 
| test the presence of the MAC address in EEPROM/fuses <br /> the command bdinfo should return a valid mac address
 
|----------------
 
|----------------
 
|'''Default IP'''  
 
|'''Default IP'''  
−
| style="background:#ff0000;" |
+
| style="background:#00ff00;" |
−
| style="background:#ff0000;" |
+
| style="background:#00ff00;" |
−
| style="background:#ff0000;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ff0000;" |  
+
| style="background:#00ff00;" |  
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| the default IP variables should be:<br /> ipaddr=192.168.0.10<br /> netmask=255.255.255.0<br /> serverip=192.168.0.2<br /> gatewayip=192.168.0.1<br /> use the "flash_reset_env" script<br />to restore the default environment variables
 
| the default IP variables should be:<br /> ipaddr=192.168.0.10<br /> netmask=255.255.255.0<br /> serverip=192.168.0.2<br /> gatewayip=192.168.0.1<br /> use the "flash_reset_env" script<br />to restore the default environment variables
 
|----------------
 
|----------------
 
|'''DHCP'''
 
|'''DHCP'''
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |
+
| style="background:#00ff00;" |
−
| style="background:#ffff00;" |   
+
| style="background:#00ff00;" |   
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| the command "DHCP" should be able<br />to update IP environment variables according<br /> to your network and DHCP server
 
| the command "DHCP" should be able<br />to update IP environment variables according<br /> to your network and DHCP server
 
|----------------
 
|----------------
 
|'''Ping'''  
 
|'''Ping'''  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |   
+
| style="background:#00ff00;" |   
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| set ipaddr & serverip according to your network.<br />Test the connection to the server: <br />ping ${serverip} should return the status "alive"  
 
| set ipaddr & serverip according to your network.<br />Test the connection to the server: <br />ping ${serverip} should return the status "alive"  
 
|----------------
 
|----------------
 
|'''Board reset'''  
 
|'''Board reset'''  
−
| style="background:#ffff00;" |
 
 
| style="background:#00ff00;" |  
 
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |   
+
| style="background:#00ff00;" |
 +
| style="background:#00ff00;" |   
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| command "reset" shall reset the board
 
| command "reset" shall reset the board
 
|----------------
 
|----------------
 
|'''TFTP'''  
 
|'''TFTP'''  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |   
+
| style="background:#00ff00;" |   
−
| style="background:#ffff00;" |   
+
| style="background:#00ff00;" |   
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| the command "run download_uboot" should <br />UBoot from the host PC into the target RAM
 
| the command "run download_uboot" should <br />UBoot from the host PC into the target RAM
 
|----------------
 
|----------------
 
|'''NFS'''  
 
|'''NFS'''  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |   
+
| style="background:#00ff00;" |   
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| the command <br />"nfs ${loadaddr} ${serverip}:/tftpboot/${board_name}-linux.bin" should download<br />linux kernel from the host PC into the target RAM
 
| the command <br />"nfs ${loadaddr} ${serverip}:/tftpboot/${board_name}-linux.bin" should download<br />linux kernel from the host PC into the target RAM
 
|----------------
 
|----------------
 
|'''Board upgrade scripts'''  
 
|'''Board upgrade scripts'''  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |   
+
| style="background:#00ff00;" |   
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| use the hereafter scripts to update the software of the board:<br /> run update_all<br /> reset<br />run flash_reset_env
 
| use the hereafter scripts to update the software of the board:<br /> run update_all<br /> reset<br />run flash_reset_env
 
|----------------
 
|----------------
 
|'''I2C'''  
 
|'''I2C'''  
−
| style="background:#ffff00;" | 38 76 7F  
+
| style="background:#00ff00;" | 38 76 7F  
 
| postponed  
 
| postponed  
−
| style="background:#ffff00;" | 38 68  
+
| style="background:#00ff00;" | 38 68  
−
| style="background:#ffff00;" | 1A 36 38  
+
| style="background:#00ff00;" | 1A 36 38  
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| startup sceen shall display:<br />I2C:  ready<br />the command "i2c probe" should return the list<br />of devices on the i2c bus of the board
 
| startup sceen shall display:<br />I2C:  ready<br />the command "i2c probe" should return the list<br />of devices on the i2c bus of the board
 
|----------------
 
|----------------
 
|'''TFTP reliability'''  
 
|'''TFTP reliability'''  
−
| style="background:#ffff00;" | 5MB
+
| style="background:#00ff00;" | 5MB
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |   
+
| style="background:#00ff00;" |   
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| Build a big rootfs (amount of mem minus 10MB) by adding a huge tar file<br > in the target root dir -  the command "run update_rootfs" should <br > download the file and update the flash accordingly
 
| Build a big rootfs (amount of mem minus 10MB) by adding a huge tar file<br > in the target root dir -  the command "run update_rootfs" should <br > download the file and update the flash accordingly
Line 156: Line 156:
 
|'''TFTP NAND option'''  
 
|'''TFTP NAND option'''  
 
| style="background:#ffffff;" | Not Applicable   
 
| style="background:#ffffff;" | Not Applicable   
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |   
+
| style="background:#00ff00;" |   
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| Build a big rootfs (bigger then RAM SIZE) by adding a huge tar file<br > in the target root dir -  the command "nand erase.part rootfs ; tftpboot ${rootfs_addr} ${board_name}-rootfs.ubi nand" should <br > download the file and update the flash accordingly
 
| Build a big rootfs (bigger then RAM SIZE) by adding a huge tar file<br > in the target root dir -  the command "nand erase.part rootfs ; tftpboot ${rootfs_addr} ${board_name}-rootfs.ubi nand" should <br > download the file and update the flash accordingly
 
|----------------
 
|----------------
 
|'''linux boot from flash'''  
 
|'''linux boot from flash'''  
−
| style="background:#ffff00;" |   
+
| style="background:#00ff00;" |   
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |   
+
| style="background:#00ff00;" |   
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| the command "boot" should start linux and rootfs from flash<br />the linux login should be "armadeus login: "
 
| the command "boot" should start linux and rootfs from flash<br />the linux login should be "armadeus login: "
 
|----------------
 
|----------------
 
|'''NFS boot (rootfs)'''  
 
|'''NFS boot (rootfs)'''  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |   
+
| style="background:#00ff00;" |   
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| http://www.armadeus.com/wiki/index.php?title=Nfs#Boot_from_NFS <br /> the command "run nfsboot" should start linux using <br />rootfs over a NFS shared drive on <br />your host server ${serverip}
 
| http://www.armadeus.com/wiki/index.php?title=Nfs#Boot_from_NFS <br /> the command "run nfsboot" should start linux using <br />rootfs over a NFS shared drive on <br />your host server ${serverip}
 
|----------------
 
|----------------
 
|''' rootfs on SD/MMC'''  
 
|''' rootfs on SD/MMC'''  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |   
+
| style="background:#00ff00;" |   
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| http://www.armadeus.com/wiki/index.php?title=MultiMediaCard#Booting_from_MMC.2FSD  <br /> the command "run mmcboot" should start linux using <br />a rootfs on your sd/mmc memory card
 
| http://www.armadeus.com/wiki/index.php?title=MultiMediaCard#Booting_from_MMC.2FSD  <br /> the command "run mmcboot" should start linux using <br />a rootfs on your sd/mmc memory card
 
|----------------
 
|----------------
 
|'''Flash lock/unlock'''  
 
|'''Flash lock/unlock'''  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
 
| Not Applicable  
 
| Not Applicable  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| For APF9328: <br />protect on all<br />erase nor0,1 <br />-> - Warning: 1 protected sectors will not be erased!<br />protect off all<br />erase nor0,1 <br />-> no warning - erase done<br /> other apf boards:<br />nand lock; nand erase.part kernel<br />Should not erase the kernel partion<br />(error message, system hang or no message)<br />
 
| For APF9328: <br />protect on all<br />erase nor0,1 <br />-> - Warning: 1 protected sectors will not be erased!<br />protect off all<br />erase nor0,1 <br />-> no warning - erase done<br /> other apf boards:<br />nand lock; nand erase.part kernel<br />Should not erase the kernel partion<br />(error message, system hang or no message)<br />
Line 196: Line 196:
 
|----------------
 
|----------------
 
|'''Env compatibility change'''  
 
|'''Env compatibility change'''  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| force a new environment version and check <br />the warning on next reboot:<br />setenv flash_env_version 0<br />saveenv<br />reset<br />=> *** Warning - Environment version change suggests:<br />run flash_reset_env; reset
 
| force a new environment version and check <br />the warning on next reboot:<br />setenv flash_env_version 0<br />saveenv<br />reset<br />=> *** Warning - Environment version change suggests:<br />run flash_reset_env; reset
 
|----------------
 
|----------------
 
|'''FPGA control'''  
 
|'''FPGA control'''  
−
| style="background:#ffff00;" | blinking_led_<br />apf9328_200k.bit  
+
| style="background:#00ff00;" | blinking_led_<br />apf9328_200k.bit  
 
| Not Applicable   
 
| Not Applicable   
−
| style="background:#ffff00;" | blinking_led_<br />apf27_200k.bit  
+
| style="background:#00ff00;" | blinking_led_<br />apf27_200k.bit  
−
| style="background:#ffff00;" | blinking_led_<br />apf51_lx9.bin  
+
| style="background:#00ff00;" | blinking_led_<br />apf51_lx9.bin  
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| the command "fpga info 0" should indicate<br /> the presence of the spartan 3 <br />Test FPGA download with the blinking_led bit file of your board:<br />tftpboot ${loadaddr} blinking_led_apfxxxx_xxxk.bit<br />fpga load 0 ${loadaddr} ${filesize}<br /> should make the LED blinking without error
 
| the command "fpga info 0" should indicate<br /> the presence of the spartan 3 <br />Test FPGA download with the blinking_led bit file of your board:<br />tftpboot ${loadaddr} blinking_led_apfxxxx_xxxk.bit<br />fpga load 0 ${loadaddr} ${filesize}<br /> should make the LED blinking without error
 
|----------------
 
|----------------
 
|'''Firmware autoload'''  
 
|'''Firmware autoload'''  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
 
| Not Applicable
 
| Not Applicable
−
| style="background:#v;" |   
+
| style="background:#00ff00;" |   
−
| style="background:#ffff00;" |   
+
| style="background:#00ff00;" |   
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| run flash_firmware<br />setenv firmware_autoload 1<br />saveenv<br /><power off>/<power on> the board<br />LED should blink after a couple of seconds and<br />UBoot should continue countdown to boot linux
 
| run flash_firmware<br />setenv firmware_autoload 1<br />saveenv<br /><power off>/<power on> the board<br />LED should blink after a couple of seconds and<br />UBoot should continue countdown to boot linux
Line 229: Line 229:
 
|'''Detect RAM SIze'''  
 
|'''Detect RAM SIze'''  
 
| not supported  
 
| not supported  
−
| style="background:#ffff00;" | 128MiB  
+
| style="background:#00ff00;" | 128MiB  
−
| style="background:#ffff00;" | Board rev. 1 with 128 MiB  
+
| style="background:#00ff00;" | Board rev. 1 with 128 MiB  
−
| style="background:#ffff00;" |  Board rev. 1 with 512MiB  
+
| style="background:#00ff00;" |  Board rev. 1 with 512MiB  
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| Using the default UBoot config test the given<br /> config is correct during boot
 
| Using the default UBoot config test the given<br /> config is correct during boot
 
|----------------
 
|----------------
 
|'''PAR cleared'''  
 
|'''PAR cleared'''  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
 
| Not Applicable  
 
| Not Applicable  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
 
| Not Applicable  
 
| Not Applicable  
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
Line 245: Line 245:
 
|'''SD/MMC driver'''  
 
|'''SD/MMC driver'''  
 
| not supported  
 
| not supported  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
−
| style="background:#ffff00;" |   
+
| style="background:#00ff00;" |   
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
 
| style="background:#ffff00;" |
 
| style="background:#ffff00;" |
 
| The command "mmcinfo" should display the SD/MMC card information
 
| The command "mmcinfo" should display the SD/MMC card information
Line 277: Line 277:
 
|'''USB'''  
 
|'''USB'''  
 
| not supported  
 
| not supported  
−
| style="background:#ffff00;" |  
+
| style="background:#00ff00;" |  
 
| not supported  
 
| not supported  
 
| not supported  
 
| not supported  

Latest revision as of 11:51, 12 February 2015

Status

  • U-Boot-2015.01: patch update and test ongoing..

Features/Status

Status Legend Color
Test passed
Compilation or runtime test failed
To be tested
Optional/not activated by default
NA/not supported


Feature Status Test case
boards apf9328 apf28 apf27 apf51 apf6
U-Boot power on U-Boot 2015.01...
I2C: ready
DRAM: 16 MiB
Flash: 8 MiB
In: serial
Out: serial
Err: serial
Net: dm9000 		HTLLCLLC

U-Boot 2015.01...
DRAM: 128 MiB
NAND: 256 MiB
MMC: MXS MMC: 0
In: serial
Out: serial
Err: serial
Net: FEC0 [PRIME] 		U-Boot 2015.01..
I2C: ready
DRAM: 64 MiB
NAND: 256 MiB
MMC: MXC MCI: 0
In: serial
Out: serial
Err: serial
Net: FEC 		U-Boot 2015.01...
I2C: ready
DRAM: 256-512 MiB
NAND: 512 MiB
MMC: FSL_SDHC: 0
In: serial
Out: serial
Err: serial
Net: FEC 		U-Boot 2015.01...
 power on the board and check the boot log of the board
NOR/NAND flash 8 MiB 256MiB-2GiB 256MiB 512MiB-4GiB startup sceen shall display:
Flash: xx MiB or NAND: xxxMiB
RAM 16/32 MiB 128MiB-512MiB 64-128MiB 256-512MiB startup sceen shall display:
DRAM: xxx MiB
Ethernet driver dm9000 FEC0 FEC FEC startup sceen shall display:
Net: <DRIVER>
Ethernet MAC dm9000 read
00000000: 1e00 00ac 		bdinfo
...
ethaddr = 00:1e:ac:... 		bdinfo
...
ethaddr = 00:1e:ac:... 		fuse read 1 9 6
...Word 0x00000009: 00000000 0000001e 000000ac ... 		test the presence of the MAC address in EEPROM/fuses
the command bdinfo should return a valid mac address
Default IP the default IP variables should be:
ipaddr=192.168.0.10
netmask=255.255.255.0
serverip=192.168.0.2
gatewayip=192.168.0.1
use the "flash_reset_env" script
to restore the default environment variables
DHCP the command "DHCP" should be able
to update IP environment variables according
to your network and DHCP server
Ping set ipaddr & serverip according to your network.
Test the connection to the server:
ping ${serverip} should return the status "alive"
Board reset command "reset" shall reset the board
TFTP the command "run download_uboot" should
UBoot from the host PC into the target RAM
NFS the command
"nfs ${loadaddr} ${serverip}:/tftpboot/${board_name}-linux.bin" should download
linux kernel from the host PC into the target RAM
Board upgrade scripts use the hereafter scripts to update the software of the board:
run update_all
reset
run flash_reset_env
I2C 38 76 7F postponed 38 68 1A 36 38 startup sceen shall display:
I2C: ready
the command "i2c probe" should return the list
of devices on the i2c bus of the board
TFTP reliability 5MB Build a big rootfs (amount of mem minus 10MB) by adding a huge tar file
in the target root dir - the command "run update_rootfs" should
download the file and update the flash accordingly
TFTP NAND option Not Applicable Build a big rootfs (bigger then RAM SIZE) by adding a huge tar file
in the target root dir - the command "nand erase.part rootfs ; tftpboot ${rootfs_addr} ${board_name}-rootfs.ubi nand" should
download the file and update the flash accordingly
linux boot from flash the command "boot" should start linux and rootfs from flash
the linux login should be "armadeus login: "
NFS boot (rootfs) http://www.armadeus.com/wiki/index.php?title=Nfs#Boot_from_NFS
the command "run nfsboot" should start linux using
rootfs over a NFS shared drive on
your host server ${serverip}
rootfs on SD/MMC http://www.armadeus.com/wiki/index.php?title=MultiMediaCard#Booting_from_MMC.2FSD
the command "run mmcboot" should start linux using
a rootfs on your sd/mmc memory card
Flash lock/unlock Not Applicable For APF9328:
protect on all
erase nor0,1
-> - Warning: 1 protected sectors will not be erased!
protect off all
erase nor0,1
-> no warning - erase done
other apf boards:
nand lock; nand erase.part kernel
Should not erase the kernel partion
(error message, system hang or no message)

boot linux
to confirm nand integrity -> kernel should start

Env compatibility change force a new environment version and check
the warning on next reboot:
setenv flash_env_version 0
saveenv
reset
=> *** Warning - Environment version change suggests:
run flash_reset_env; reset
FPGA control blinking_led_
apf9328_200k.bit 		Not Applicable blinking_led_
apf27_200k.bit 		blinking_led_
apf51_lx9.bin 		the command "fpga info 0" should indicate
the presence of the spartan 3
Test FPGA download with the blinking_led bit file of your board:
tftpboot ${loadaddr} blinking_led_apfxxxx_xxxk.bit
fpga load 0 ${loadaddr} ${filesize}
should make the LED blinking without error
Firmware autoload Not Applicable run flash_firmware
setenv firmware_autoload 1
saveenv
<power off>/<power on> the board
LED should blink after a couple of seconds and
UBoot should continue countdown to boot linux
imxfuse commands Not Applicable ocotp imxfuse mac... iim blow fecmac... Use production tool to blow a MAC address
Detect RAM SIze not supported 128MiB Board rev. 1 with 128 MiB Board rev. 1 with 512MiB Using the default UBoot config test the given
config is correct during boot
PAR cleared Not Applicable Not Applicable run unlock_regs; boot
once logged on linux try the command
imxregs CSR
should display imx register value instead of any error like "Unhandled fault"
SD/MMC driver not supported The command "mmcinfo" should display the SD/MMC card information
NETCONSOLE not supported not supported not supported not supported Ethernet_console
LCD not supported not supported not supported not supported
SPI not supported not supported not supported not supported
USB not supported not supported not supported usb start; usb reset; usb tree

PPS Test/Status

Feature Status Test case
boards PPS (PPS27) PPS51
U-Boot power on U-Boot 2014.04..
CPU: Freescale i.MX27 at 399 MHz
Armadeus APF27
DRAM: 64 MiB
NAND: 256 MiB 		U-Boot 2014.04...
I2C: ready
DRAM: 256-512 MiB
NAND: 512 MiB
In: serial
Out: serial
Err: serial
Net: FEC 		power on the board and check the boot log of the board
NOR/NAND flash 256 MiB 512MiB startup sceen shall display:
Flash: xx MiB
RAM 64-128MiB 256-512MiB startup sceen shall display:
DRAM: xx MiB
Ethernet driver FEC FEC startup sceen shall display:
Net: <DRIVER>
DHCP the command "DHCP" should be able
to update IP environment variables according
to your network and DHCP server
Ping set ipaddr & serverip according to your network.
Test the connection to the server:
ping ${serverip} should return the status "alive"
Board reset command "reset" shall reset the board
TFTP the command "run download_uboot" should
UBoot from the host PC into the target RAM
Board upgrade scripts use the hereafter scripts to update the software of the board:
run update_all
run flash_reset_env
TFTP reliability Build a big rootfs (amount of mem minus 10MB) by adding a huge tar file
in the target root dir - the command "run update_rootfs" should
download the file and update the flash accordingly
linux boot from flash the command "boot" should start linux and rootfs from flash
the linux login should be "armadeus login: "
Wifi test boot linux and initiate a wifi connection : load drivers and scan wifi network
Retrieved from "http://armadeus.org/wiki/index.php?title=U-Boot-2015.01&oldid=13026"