Difference between revisions of "Modelsim-Altera"
From ArmadeusWiki
(→Freetype) |
|||
| Line 70: | Line 70: | ||
It's a freetype library version [http://mattaw.blogspot.in/2014/05/making-modelsim-altera-starter-edition.html problem]. | It's a freetype library version [http://mattaw.blogspot.in/2014/05/making-modelsim-altera-starter-edition.html problem]. | ||
| − | + | To fix it do this : | |
<source lang="bash"> | <source lang="bash"> | ||
$ cd /opt/quartus/ | $ cd /opt/quartus/ | ||
| Line 82: | Line 82: | ||
$ sudo vim ../Modelsim/modelsim_ase/bin/vsim | $ sudo vim ../Modelsim/modelsim_ase/bin/vsim | ||
</source> | </source> | ||
| + | |||
| + | Under this line: | ||
| + | <source lang="bash"> | ||
| + | dir=`dirname $arg0` | ||
| + | </source> | ||
| + | |||
| + | Add | ||
| + | <source lang="bash"> | ||
| + | dir=`dirname $arg0` | ||
| + | export LD_LIBRARY_PATH=${dir}/lib32 | ||
| + | </source> | ||
| + | |||
| + | enjoy! | ||
Revision as of 10:55, 18 August 2015
Page under construction...
Informations on this page are not guaranteed !!
Contents
Introduction
Altera provide a integrated version of Modelsim for its FPGA.
To simulate design with less than 10000 lines of code it's possible to get it from free. It's called the Starter Edition. This articles explain how to install the modelsim-altera starter edition on Linux (Ubuntu/Debian).
Installation guide (Quartus 14.0)
We assume that modelsim will be installed under /opt/quartus/ directory.
Download
- Browse altera download page
- Download the ModelSim-Altera Edition (includes Starter Edition) (about 1.1GB), you must be logged in.
Launch installer
- Create Modelsim directory and make installer script executable :
$ cd /opt/quartus/
$ mkdir Modelsim
$ chmod +x ModelSimSetup-14.0.0.200-linux.run
- Launch it
./ModelSimSetup-14.0.0.200-linux.run
- Click next
- Select Modelsim-Altera Starter Edition then next
- Accept agreement then next
- Choose directory /opt/quartus/Modelsim/
- next, next
- finish
Configure environment
- Add this line in your .bashrc :
export PATH=$PATH:/opt/quartus/Modelsim/modelsim_ase/bin
- Open new terminal (to reset environment variables)
- launch quartus
- Configure your modelsim EDA path in Tools->Options-> Eda tool options :
/opt/Modelsim/modelsim_ase/bin
- Launch it with Tools->run simulation Tool -> RTL simulation
Known problems
Freetype
When you get:
$ vsim ** Fatal: Read failure in vlm process (0,0) Segmentation fault $
It's a freetype library version problem. To fix it do this :
$ cd /opt/quartus/
$ wget http://download.savannah.gnu.org/releases/freetype/freetype-2.4.12.tar.bz2
$ tar -jxvf freetype-2.4.12.tar.bz2
$ cd freetype-2.4.12
$ ./configure --build=i686-pc-linux-gnu "CFLAGS=-m32" "CXXFLAGS=-m32" "LDFLAGS=-m32"
$ make -j8
$ mkdir ../Modelsim/modelsim_ase/lib32
$ cp objs/.libs/libfreetype.so* ../Modelsim/modelsim_ase/lib32/
$ sudo vim ../Modelsim/modelsim_ase/bin/vsim
Under this line:
dir=`dirname $arg0`
Add
dir=`dirname $arg0`
export LD_LIBRARY_PATH=${dir}/lib32
enjoy!
