Difference between revisions of "I.MX6UL internal ADC"
From ArmadeusWiki
(→Introduction) |
(→Read channels value) |
||
| Line 43: | Line 43: | ||
# cd /sys/bus/iio/devices/iio:device0 | # cd /sys/bus/iio/devices/iio:device0 | ||
# ls | # ls | ||
| − | buffer | + | buffer in_voltage5_raw |
| − | + | current_timestamp_clock in_voltage6_raw | |
| − | + | dev in_voltage7_raw | |
| − | + | in_conversion_mode in_voltage8_raw | |
| − | + | in_temp_input in_voltage9_raw | |
| − | + | in_voltage0_raw in_voltage_sampling_frequency | |
| + | in_voltage10_raw in_voltage_scale | ||
| + | in_voltage11_raw name | ||
| + | in_voltage12_raw of_node | ||
| + | in_voltage13_raw power | ||
| + | in_voltage14_raw sampling_frequency_available | ||
| + | in_voltage15_raw scan_elements | ||
| + | in_voltage1_raw subsystem | ||
| + | in_voltage2_raw trigger | ||
| + | in_voltage3_raw uevent | ||
| + | in_voltage4_raw | ||
</pre> | </pre> | ||
To read ADC value just «cat» the corresponding input file: | To read ADC value just «cat» the corresponding input file: | ||
<pre class="apf"> | <pre class="apf"> | ||
| − | # cat | + | # cat in_voltage1_raw for channel 1 (ADC1_IN1) |
4095 | 4095 | ||
</pre> | </pre> | ||
| − | All values are not converted (ie. directly show the register content). To have the mV value, you must doi: value_mV = read_value * | + | All values are not converted (ie. directly show the register content). To have the mV value, you must doi: value_mV = read_value * 3300/4095 |
==Links== | ==Links== | ||
Revision as of 18:26, 19 December 2016
Introduction
This description uses Linux kernel >= 4.8.
i.MX6UL (processor of OPOS6UL has an integrated 12 bits 16 channels Analog to Digital Converter.
Only channels 0-6 may be used to generic conversions and channels 2, 3, 4, 5 are used for the touchscreen on OPOS6ULDev.
- Channel 1 is available on J21 pin 40 of OPOS6ULDev (AIN1/YNLR: muxed with touchscreen)
- Channel 2 is available on J21 pin 38 of OPOS6ULDev (AIN2/YPLL: muxed with touchscreen)
- Channel 3 is available on J21 pin 39 of OPOS6ULDev (AIN3/XNUR: muxed with touchscreen)
- Channel 4 is available on J21 pin 37 of OPOS6ULDev (AIN4/XPUL: muxed with touchscreen)
Driver
Driver is by default included if you choose an OPOS6UL as target.
Otherwise, you can select it that way:
[ ] $ make linux-menuconfig
Device Drivers --->
...
<*> Industrial I/O support --->
...
Analog to digital converters
...
<*> Freescale vf610 ADC driver
Then compile the distribution :
[ ] $ make linux && make
Use it
Read channels value
# cd /sys/bus/iio/devices/iio:device0 # ls buffer in_voltage5_raw current_timestamp_clock in_voltage6_raw dev in_voltage7_raw in_conversion_mode in_voltage8_raw in_temp_input in_voltage9_raw in_voltage0_raw in_voltage_sampling_frequency in_voltage10_raw in_voltage_scale in_voltage11_raw name in_voltage12_raw of_node in_voltage13_raw power in_voltage14_raw sampling_frequency_available in_voltage15_raw scan_elements in_voltage1_raw subsystem in_voltage2_raw trigger in_voltage3_raw uevent in_voltage4_raw
To read ADC value just «cat» the corresponding input file:
# cat in_voltage1_raw for channel 1 (ADC1_IN1) 4095
All values are not converted (ie. directly show the register content). To have the mV value, you must doi: value_mV = read_value * 3300/4095
