Difference between revisions of "OPOS6ULDev"
From ArmadeusWiki
(→Connectors) |
(→Feature list) |
||
| Line 53: | Line 53: | ||
===Other=== | ===Other=== | ||
| + | * [[I.MX6UL_internal_ADC|ADC]] | ||
* [[GPIOlib]] | * [[GPIOlib]] | ||
* [[JTAG]] | * [[JTAG]] | ||
Revision as of 18:27, 19 December 2016
Contents
Description
This is the Armadeus System's standard development board/baseboard for the OPOS6UL module.
Errata
Resources
Feature list
AudioVideo OutVideo In |
User InputWired communicationStorage |
Wireless communicationOther |
Connectors
- RPi compatible connector:
| Linux GPIO | i.M6UL Mux | wiringPi N° | RPi name | Function | JX Pin | JX Pin | Function | RPi name | wiringPi N° | i.M6UL Mux | Linux GPIO |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3.3V | 1 | 2 | 5V | ||||||||
| SDA1 | I2C data | 3 | 4 | 5V | |||||||
| SCL1 | I2C clock | 5 | 6 | GND | |||||||
| gpio9 | GPIO1_IO09__GPIO1_IO09 | 7 | GPIO7 | GPIO | 7 | 8 | UART Tx | TxD | |||
| GND | 9 | 10 | UART Rx | RxD | |||||||
| gpio24 | UART3_TX_DATA__GPIO1_IO24 | 0 | GPIO0 | GPIO | 11 | 12 | GPIO | GPIO1 | |||
| gpio25 | UART3_RX_DATA__GPIO1_IO25 | GPIO2 | GPIO | 13 | 14 | GND | |||||
| gpio96 | NAND_RE_B__GPIO4_IO00 | GPIO3 | GPIO | 15 | 16 | GPIO | GPIO4 | 4 | UART1_CTS_B__GPIO1_IO18 | gpio18 | |
| 3,3V | 17 | 18 | GPIO | GPIO5 | 5 | UART1_RTS_B__GPIO1_IO19 | gpio19 | ||||
| SPI MOSI | 19 | 20 | GND | ||||||||
| SPI MISO | 21 | 22 | GPIO | GPIO6 | 6 | NAND_WE_B__GPIO4_IO01 | gpio97 | ||||
| SPI CLK | 23 | 24 | SPI_CS0 | ||||||||
| GND | 25 | 26 | SPI_CS1 | ||||||||
| I2C Data | 27 | 28 | I2C clock | ||||||||
| GPIO | 29 | 30 | GND | ||||||||
| GPIO | 31 | 32 | GPIO | SNVS_TAMPER0__GPIO5_IO00 | gpio128 | ||||||
| GPIO | 33 | 34 | GND | ||||||||
| GPIO | 35 | 36 | GPIO | SNVS_TAMPER3__GPIO5_IO03 | gpio131 | ||||||
| GPIO | 37 | 38 | GPIO | SNVS_TAMPER2__GPIO5_IO02 | gpio130 | ||||||
| GND | 39 | 40 | GPIO | SNVS_TAMPER1__GPIO5_IO01 | gpio129 |
Tested RPi shields/hats
Tips
Bootstrap
- Put Boot0 jumper to go in Bootstrap mode
Linux
- to activate login in Framebuffer console, please uncomment /etc/inittab line 35 this way:
# Set up a getty on LCD tty1::respawn:/sbin/getty 38400 tty1
RaspberryPi is a registered trademark of RaspberryPi Foundation.
