Difference between revisions of "OPOS6UL NANO"
From ArmadeusWiki
(Created page with "Category: OPOS6UL_NANO ==Description== File:OPOS6UL_NANO.png The OPOS6UL_NANO is a [https://en.wikipedia.org/wiki/Single-board_computer Single Board Computer]. Her...") |
(→Description) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 8: | Line 8: | ||
Here is a list of the main features: | Here is a list of the main features: | ||
| − | * Processor: [ | + | * Processor: [https://www.nxp.com/products/processors-and-microcontrollers/applications-processors/i.mx-applications-processors/i.mx-6-processors/i.mx-6ull-single-core-processor-with-arm-cortex-a7-core:i.MX6ULL i.MX6ULL] (i.MX6ULL single A7 @ 800 or 900MHz) |
* RAM: DDR3 800Mbps. Default capacity is 256Mbytes. | * RAM: DDR3 800Mbps. Default capacity is 256Mbytes. | ||
* Flash: [[EMMC OPOS6UL|eMMC]] 4GBytes to 32GBytes (default 4GB), 8 bits data bus. | * Flash: [[EMMC OPOS6UL|eMMC]] 4GBytes to 32GBytes (default 4GB), 8 bits data bus. | ||
| Line 15: | Line 15: | ||
* USB: High speed Host | * USB: High speed Host | ||
* TFT CMOS interface | * TFT CMOS interface | ||
| − | * Wi-Fi (option): b/g/n with u.FL antenna | + | * Wi-Fi+Bluetooth (option): b/g/n with u.FL antenna (CYW4343W module), BT 4.1 (Low Energy compatible) |
| − | + | ||
* Only one external supply of 3.3V required. | * Only one external supply of 3.3V required. | ||
* Mechanical dimensions: 37 x 22 mm | * Mechanical dimensions: 37 x 22 mm | ||
Latest revision as of 11:00, 23 July 2018
Contents
Description
The OPOS6UL_NANO is a Single Board Computer.
Here is a list of the main features:
- Processor: i.MX6ULL (i.MX6ULL single A7 @ 800 or 900MHz)
- RAM: DDR3 800Mbps. Default capacity is 256Mbytes.
- Flash: eMMC 4GBytes to 32GBytes (default 4GB), 8 bits data bus.
- Ethernet: onboard Physical (ready to use Ethernet 10/100Mbit link)
- USB: High speed USB OTG (OnTheGo), software only
- USB: High speed Host
- TFT CMOS interface
- Wi-Fi+Bluetooth (option): b/g/n with u.FL antenna (CYW4343W module), BT 4.1 (Low Energy compatible)
- Only one external supply of 3.3V required.
- Mechanical dimensions: 37 x 22 mm
- Connector: NGFF (M.2) 67pts
Resources
Workaround
- When you get that kind of error at Wi-Fi initialisation:
brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
- You can try to unload/reload the driver:
# modprobe -r brcmfmac # modprobe brcmfmac [ 1881.792273] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Aug 29 2016 20:48:16 version 7.45.41.26 (r640327) FWID 01-4527cfab [ 1881.850588] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30)
Feature list
VideoVideo OutVideo In |
Wired communication |
Wireless communicationStorageOther |
