Difference between revisions of "Serial Transfer"
From ArmadeusWiki
(→TBDL) |
(→Microcom) |
||
| (5 intermediate revisions by the same user not shown) | |||
| Line 7: | Line 7: | ||
When you only have a serial link (RS232/USB) as connection with your devt PC (ie no Ethernet available), then you can use Zmodem protocol to send/receive files to/from your Shell/Console of your Armadeus board. | When you only have a serial link (RS232/USB) as connection with your devt PC (ie no Ethernet available), then you can use Zmodem protocol to send/receive files to/from your Shell/Console of your Armadeus board. | ||
| − | == | + | == Linux == |
| − | ===Target (APF)=== | + | ===Installation=== |
| + | |||
| + | ====Target (APF)==== | ||
Modify your Buildroot configuration: | Modify your Buildroot configuration: | ||
<pre class="host"> | <pre class="host"> | ||
| Line 27: | Line 29: | ||
Reflash it or manually copy ''rz'' and ''sz'' executables found in ''$ARMADEUS_ROOTFS_DIR/usr/bin/''. | Reflash it or manually copy ''rz'' and ''sz'' executables found in ''$ARMADEUS_ROOTFS_DIR/usr/bin/''. | ||
| − | ===Host=== | + | ====Host==== |
* Install lrzsz package, if not already installed on your system. For example on Ubuntu/Debian: | * Install lrzsz package, if not already installed on your system. For example on Ubuntu/Debian: | ||
<pre class="host"> | <pre class="host"> | ||
| Line 41: | Line 43: | ||
</pre> | </pre> | ||
| − | ==Usage== | + | ===Usage=== |
| − | {{Warning| You must use minicom as serial terminal and not kermit, sorry ! :-(}} | + | {{Warning| You must use [[minicom]] as serial terminal and not [[kermit]]/[[screen]], sorry ! :-(}} |
* Be sure to have correctly configured Minicom (line speed, 8N1, no flow control, and correct download/upload directories path). | * Be sure to have correctly configured Minicom (line speed, 8N1, no flow control, and correct download/upload directories path). | ||
* Use '''rz''' for receiving and '''sz''' to send files: | * Use '''rz''' for receiving and '''sz''' to send files: | ||
| − | ===Host (PC) --> Target (APF)=== | + | ====Host (PC) --> Target (APF)==== |
<pre class="apf"> | <pre class="apf"> | ||
# cd /whereToPutTheFileOnTheTarget/ | # cd /whereToPutTheFileOnTheTarget/ | ||
| Line 52: | Line 54: | ||
.. waiting to receive. | .. waiting to receive. | ||
</pre> | </pre> | ||
| − | * then in minicom do: '''Ctrl+ | + | * then in minicom do: '''Ctrl+a , s''' and choose zmodem protocol and the file to send. |
* Wait a little and your file will be copied to your board rootfs ! ;-) | * Wait a little and your file will be copied to your board rootfs ! ;-) | ||
| − | ===Target (APF) --> Host (PC)=== | + | ====Target (APF) --> Host (PC)==== |
<pre class="apf"> | <pre class="apf"> | ||
# cd /location/of_the/file_to_send/on_the_apf/ | # cd /location/of_the/file_to_send/on_the_apf/ | ||
| Line 62: | Line 64: | ||
Minicom handles the file receiving automatically (and put it in your $HOME by default, or the directory you configured in Minicom: Ctrl+z, o, ''Filenames and paths'', ''Download directory'') | Minicom handles the file receiving automatically (and put it in your $HOME by default, or the directory you configured in Minicom: Ctrl+z, o, ''Filenames and paths'', ''Download directory'') | ||
| − | ==TBDL== | + | ===TBDL=== |
| − | ===Serial transfer through USB gadget as serial link=== | + | ====Serial transfer through USB gadget as serial link==== |
After having booted your board: | After having booted your board: | ||
* On your Target, open a new terminal on your serial link (here USB): | * On your Target, open a new terminal on your serial link (here USB): | ||
| Line 71: | Line 73: | ||
* On your Host, launch Minicom and configure it to use ''/dev/ttyUSB1'' at 115200, then connect it to this terminal | * On your Host, launch Minicom and configure it to use ''/dev/ttyUSB1'' at 115200, then connect it to this terminal | ||
| − | ==Transfer without terminal== | + | ===Transfer without terminal=== |
* On your Target, launch receiving: | * On your Target, launch receiving: | ||
<pre class="apf"> | <pre class="apf"> | ||
| Line 80: | Line 82: | ||
$ sz --zmodem /tftpboot/afiletosend 1>/dev/ttyUSB1 0</dev/ttyUSB1 | $ sz --zmodem /tftpboot/afiletosend 1>/dev/ttyUSB1 0</dev/ttyUSB1 | ||
</pre> | </pre> | ||
| + | |||
| + | == UBoot == | ||
| + | |||
| + | === Minicom === | ||
| + | |||
| + | With [[minicom]] use ymodem : | ||
| + | |||
| + | * type: | ||
| + | <pre class="apf"> | ||
| + | BIOS> loady ${loadaddr} | ||
| + | Ctrl+A Z | ||
| + | </pre> | ||
| + | * Select ymodem then filename | ||
==Links== | ==Links== | ||
Latest revision as of 17:31, 1 February 2022
Instructions to use the serial port of your Armadeus board to transfer files from/to your PC.
 |
Note: This page explains how to transfer files on the board when the Linux system has started, not from U-Boot !.
To know how to configure serial link for U-Boot communication, it's here. |
Contents
Introduction
When you only have a serial link (RS232/USB) as connection with your devt PC (ie no Ethernet available), then you can use Zmodem protocol to send/receive files to/from your Shell/Console of your Armadeus board.
Linux
Installation
Target (APF)
Modify your Buildroot configuration:
$ make menuconfig
to add lrzsz package:
Package Selection for the target --->
Networking applications --->
[*] lrzsz
and then rebuild your rootfs:
$ make
Reflash it or manually copy rz and sz executables found in $ARMADEUS_ROOTFS_DIR/usr/bin/.
Host
- Install lrzsz package, if not already installed on your system. For example on Ubuntu/Debian:
$ sudo apt-get install lrzsz
- Install minicom tool:
$ sudo apt-get install minicom
- The first time, configure minicom (as root):
$ sudo minicom -s
Usage
- Be sure to have correctly configured Minicom (line speed, 8N1, no flow control, and correct download/upload directories path).
- Use rz for receiving and sz to send files:
Host (PC) --> Target (APF)
# cd /whereToPutTheFileOnTheTarget/ # rz -bZ .. waiting to receive.
- then in minicom do: Ctrl+a , s and choose zmodem protocol and the file to send.
- Wait a little and your file will be copied to your board rootfs ! ;-)
Target (APF) --> Host (PC)
# cd /location/of_the/file_to_send/on_the_apf/ # sz -b --zmodem filename
Minicom handles the file receiving automatically (and put it in your $HOME by default, or the directory you configured in Minicom: Ctrl+z, o, Filenames and paths, Download directory)
TBDL
Serial transfer through USB gadget as serial link
After having booted your board:
- On your Target, open a new terminal on your serial link (here USB):
# /sbin/getty -L ttygserial 115200 vt100
- On your Host, launch Minicom and configure it to use /dev/ttyUSB1 at 115200, then connect it to this terminal
Transfer without terminal
- On your Target, launch receiving:
# rz --zmodem 1>/dev/ttyXXX 0</dev/ttyXXX
- On your Host, launch transfer:
$ sz --zmodem /tftpboot/afiletosend 1>/dev/ttyUSB1 0</dev/ttyUSB1
UBoot
Minicom
With minicom use ymodem :
- type:
BIOS> loady ${loadaddr}
Ctrl+A Z
- Select ymodem then filename
