Difference between revisions of "MTF-T035"
(→LCD orders) |
m (→Adapter Board: typo) |
||
| Line 12: | Line 12: | ||
== Adapter Board == | == Adapter Board == | ||
This kind of LCD requires an adapter board. | This kind of LCD requires an adapter board. | ||
| − | The small board generates the required bias voltages, integrates a | + | The small board generates the required bias voltages, integrates a white led driver and provides a standard 2.54 connector interface. |
It has to be noted that a simple 3.3V supply must be used. | It has to be noted that a simple 3.3V supply must be used. | ||
| Line 21: | Line 21: | ||
[http://www.armadeus.com/downloads/lcd_adapt_MTFT035/assembly.pdf] | [http://www.armadeus.com/downloads/lcd_adapt_MTFT035/assembly.pdf] | ||
| − | Note that the pin 1 of the connectors are | + | Note that the pin 1 of the connectors are although written in the top layer copper. |
| − | + | ||
| − | + | ||
== Connections with the DevLight == | == Connections with the DevLight == | ||
Revision as of 21:50, 26 March 2007
TFT Specifications
The MTF-T035 320x240 3.5" color TFT display from Microtips is the default TFT display supported. Two pin compatible versions are available. One with touchscreen (analog outputs) and one without. The MTF-T035 is provided with a 4 white led backlight.
The specification can be found here: [1]
Some photos are although available here: Board Pictures
Adapter Board
This kind of LCD requires an adapter board. The small board generates the required bias voltages, integrates a white led driver and provides a standard 2.54 connector interface. It has to be noted that a simple 3.3V supply must be used.
The schematics can be found here: [2]
The assembly drawings can be found here: [3]
Note that the pin 1 of the connectors are although written in the top layer copper.
Connections with the DevLight
Just connect signals with same names together. Use only short wires !
The DevLight schematics and specification may be usefull: [4]
Once done verify the connections by means of your multimeter. Do not forget to check the 3.3V supply polarity on the LCD_adapt board before to power up the system !
LCD orders
Please add your name and the LCD type you want to the list below. On order will be placed in two/three weeks. The production of the LCD Adapter board has been launched. Expected delivery date: Week 17/18
- Rachid Koucha: 1x LCD_Touchscreen
- ThomasB: 1x LCD (with or without touchscreen)??
- Michael Lerjen: 1x LCD (with or without touchscreen)??
- Olivier Coutanceau: 1x LCD_Touchscreen
- Arnaud Coffinet : 1x LCD_Touchscreen
- Henri Geist : 1x LCD_Touchscreen
- JulienB: 1x LCD_Touchscreen
