Difference between revisions of "Setup"
From ArmadeusWiki
m (5V) |
|||
| Line 19: | Line 19: | ||
* [[GPIO Driver]]: how to configure the GPIO driver | * [[GPIO Driver]]: how to configure the GPIO driver | ||
* [[Network Configuration]]: how to configure Host and Target network (NFS, TFTP) | * [[Network Configuration]]: how to configure Host and Target network (NFS, TFTP) | ||
| + | * [[Boa]]: How install and configure the boa Web server on your board | ||
* [[Serial Transfer]]: how to transfer files between your Host and your Armadeus board with the RS232 link (if you don't have Ethernet) | * [[Serial Transfer]]: how to transfer files between your Host and your Armadeus board with the RS232 link (if you don't have Ethernet) | ||
* [[USB Gadget]]: how to configure your Armadeus board to use it as a USB device (aka Gadget in Linux language) | * [[USB Gadget]]: how to configure your Armadeus board to use it as a USB device (aka Gadget in Linux language) | ||
Revision as of 22:07, 19 April 2007
On this page, you will find all the usefull informations you need to configure your Armadeus board for optimum usage.
Contents
[hide]First StartUp
Just got your Armadeus board and want to start play with it ? Then follow this quick list to setup your envt accordingly:
- 1. Connect your APF to your development board or to a Devlight --->>
- 2. Connect the Host (your PC) to your development system with a crossover RS232 cable
- 3. Power up the system (+5Vdc on a Devlight + is in the middle of the connector)
- 4. Establish the communication between your Host and your APF: See Communicate
- 5. Verify your APF by starting Linux: In uBoot, type "boot". Several informations will be displayed on your console like on the screenshot Linux start screenshot
- 6. If Linux has successfully started, you can proceed with the toolchain installation. See Basics below
Basics
- Toolchain: How to install the development environment for the Armadeus boards
- Communicate: How to communicate with the Armadeus boards from the Host
- Target Software Installation: How to install, uBoot, Linux and your RootFS on the Armadeus boards
Packages and Modules
- FrameBuffer: how to configure and use the framebuffer for new LCDs
- GPIO Driver: how to configure the GPIO driver
- Network Configuration: how to configure Host and Target network (NFS, TFTP)
- Boa: How install and configure the boa Web server on your board
- Serial Transfer: how to transfer files between your Host and your Armadeus board with the RS232 link (if you don't have Ethernet)
- USB Gadget: how to configure your Armadeus board to use it as a USB device (aka Gadget in Linux language)
- MultiMediaCard: how to use MMC/SD cards on Linux with your Armadeus board
- Digital to Analog Convertion: how to configure and use the DAC on your board
- FPGA loader: how to upload a new firmware from Linux
- Analog to Digital Converter: how to install and use the on board ADC (max1027)
- PWM: how to use the i.MX integrated PWM
- RTC: how to use an external Real Time Clock (Maxim DS1374)
- Watchdog: how to configure and use the i.MX integrated Watchdog
Advanced
- BootLoader: (U-Boot useful tips)
- BootStrap: communicate and test your board when no software is installed on it
