Difference between revisions of "Setup"
From ArmadeusWiki
(→Advanced) |
(improve layout) |
||
| Line 2: | Line 2: | ||
==First StartUp== | ==First StartUp== | ||
| − | Just got your Armadeus board and want to start play with it ? Then follow this quick list to setup your | + | Just got your Armadeus board and want to start play with it ? <br> |
| − | *1. Connect your APF to your development board or to a | + | Then follow this quick list to setup your environment accordingly: <br> |
| − | *2. Connect | + | *1. Connect your APF to your custom development board or to a DevLight (= the Target) --->> [[Image:Apf_on_devlight.png]] <br> |
| − | *3. Power up the system ('''+5Vdc on a Devlight + is in the middle of the connector''') <br> | + | *2. Connect your PC (= the Host) to your development system with a null-modem RS232 cable <br> |
| − | *4. Establish the communication between your Host and your APF | + | *3. Power up the system ('''+5Vdc on a Devlight. + is in the middle of the connector, - on the side''') <br> |
| − | *5. Verify your APF by starting Linux: In | + | *4. [[Communicate | Establish the communication between your Host and your APF]] <br> |
| + | *5. Verify your APF by starting Linux: In U-Boot, type "boot". Several informations will be displayed on your console like on this [[Linux start screenshot | screenshot ]] <br> | ||
*6. If Linux has successfully started, you can proceed with the toolchain installation. See Basics below <br> | *6. If Linux has successfully started, you can proceed with the toolchain installation. See Basics below <br> | ||
Revision as of 13:08, 14 September 2007
On this page, you will find all the usefull informations you need to configure your Armadeus board for optimum usage.
Contents
[hide]First StartUp
Just got your Armadeus board and want to start play with it ?
Then follow this quick list to setup your environment accordingly:
- 1. Connect your APF to your custom development board or to a DevLight (= the Target) --->>
- 2. Connect your PC (= the Host) to your development system with a null-modem RS232 cable
- 3. Power up the system (+5Vdc on a Devlight. + is in the middle of the connector, - on the side)
- 4. Establish the communication between your Host and your APF
- 5. Verify your APF by starting Linux: In U-Boot, type "boot". Several informations will be displayed on your console like on this screenshot
- 6. If Linux has successfully started, you can proceed with the toolchain installation. See Basics below
Basics
- Toolchain: How to install the development environment for the Armadeus boards
- Communicate: How to communicate with the Armadeus boards from the Host
- Target Software Installation: How to install, uBoot, Linux and your RootFS on the Armadeus boards
Packages and Modules
- FrameBuffer: how to configure and use the framebuffer for new LCDs
- How to control the backlight of you graphical LCD (if it supports it)
- GPIO Driver: how to configure the GPIO driver
- Network Configuration: how to configure Host and Target network (NFS, TFTP)
- Boa: How install and configure the boa Web server on your board
- Serial Transfer: how to transfer files between your Host and your Armadeus board with the RS232 link (if you don't have Ethernet)
- USB Gadget: how to configure your Armadeus board to use it as a USB device (aka Gadget in Linux language)
- MultiMediaCard: how to use MMC/SD cards on Linux with your Armadeus board
- Digital to Analog Convertion: how to configure and use the DAC on your board
- FPGA loader: how to upload a new firmware from Linux
- Analog to Digital Converter: how to install and use the on board ADC (max1027)
- PWM: how to use the i.MX integrated PWM
- RTC: how to use an external Real Time Clock (Maxim DS1374)
- Watchdog: how to configure and use the i.MX integrated Watchdog
Advanced
- BootLoader: (U-Boot useful tips)
- BootStrap: Install an uBoot from scratch or recover your uBoot if it is corrupted
