Difference between revisions of "TSC2102 Linux driver"

From ArmadeusWiki
Jump to: navigation, search
m (→‎Usage)
(→‎Installation)
Line 1: Line 1:
 
==Installation==
 
==Installation==
 
  $ make linux-menuconfig
 
  $ make linux-menuconfig
 +
 +
in 'device driver/input device support' select 'event interface' as kernel part
 +
in 'device driver/input device support' select 'touchscreen ->tsc2102' as module
 +
 +
in 'device driver/spi support' select 'spi support ->freescale iMX spi' as module
 +
in 'device driver/spi support' select 'spi support ->TSC2102 codec' as module
 +
 +
if the harware monitoring functions are required (Temperature, battery measurements)
 +
the HWMON support has to be activated:
 +
 +
in 'device driver/hardware monitoring support' select 'hardware monitoring support' as module
  
 
==Architecture==
 
==Architecture==

Revision as of 15:58, 20 September 2007

Installation

$ make linux-menuconfig

in 'device driver/input device support' select 'event interface' as kernel part
in 'device driver/input device support' select 'touchscreen ->tsc2102' as module 

in 'device driver/spi support' select 'spi support ->freescale iMX spi' as module
in 'device driver/spi support' select 'spi support ->TSC2102 codec' as module

if the harware monitoring functions are required (Temperature, battery measurements) 
the HWMON support has to be activated:

in 'device driver/hardware monitoring support' select 'hardware monitoring support' as module

Architecture

Touchscreen (tsc2102_ts.ko) HWmon ALSA
TSC2102 Main driver (tsc2102.ko)
Linux API

Usage

# insmod /mnt/host/lib/modules/spi_imx.ko
# insmod /mnt/host/lib/modules/tsc2102.ko
# insmod /mnt/host/lib/modules/evdev.ko
# insmod /mnt/host/lib/modules/tsc2102_ts.ko

Then:

  • get temperature and voltage with hwmon (Hardware Monitoring) interface,
  • use touchscreen interface with tslib API,
  • play sounds through ALSA interface

Quick test

To quickly check driver fonctionnality, touch the screen and check that tsc2102 interrupts count is increasing: 

# cat /proc/interrupts
          CPU0
26:          0         MPU  IMX-uart
29:         17         MPU  IMX-uart
30:         22         MPU  IMX-uart
35:         12         MPU  imx-mmc
39:         14         MPU  I2C_IMX
40:         16         MPU  imx-spi.2
41:          0         MPU  imx-spi.1
59:       3682         MPU  i.MX Timer Tick
60:          0         MPU  DMA
61:          0         MPU  DMA
110:         0        GPIO  eth0
168:         0        GPIO  tsc2102
Err:         0
#

Links

Retrieved from "http://armadeus.org/wiki/index.php?title=TSC2102_Linux_driver&oldid=2825"