Difference between revisions of "Qt/Embedded"

Revision as of 12:34, 12 May 2008

Instructions to install and use QtEmbedded & Qt virtual frame buffer for Armadeus

Introduction

This page will summarize the process to build, install and use Qtopia.

You will also find instructions to setup a Host development environment for simulating applications before deploying them on the target (Qt virtual frame buffer). The builroot tree must be installed before the installation of Qt.

Installation

From November 20th 2007, Qtopia is now fully integrated in Armadeus Buildroot. So to install it you have to:

[armadeus]$ make menuconfig

then

and then

(don't forget -depths 8,16 option)

then:

[armadeus]$ make

1hour and 800MBytes later your will have the beast. If you want to test it, reflash your rootfs, and put some examples in your NFS shared directory:

[armadeus]$ cp buildroot/build_arm/qtopia-core-opensource-src-4.3.1/examples/widgets/calculator/calculator \ 
                /local/export/usr/bin

and then launch it on your APF:

# /mnt/nfs/usr/bin/calculator -qws

!!! FOLLOWING INSTRUCTIONS ARE OBSOLETE AND HERE ONLY FOR HISTORICAL PURPOSE !!!

Requirements

You must install the libc++ on your target. If you want to use the Qt Gui module, you must have the libpng package (select it in the menuconfig in buildroot).

Getting the packages

You must get the packages qtopia-core-opensource-src-4.2.0.tar.gz & qt-x11-opensource-src-4.2.0.tar.gz from the ftp server of the trolltech company as anonymous user (no password)

# ftp ftp.trolltech.com
# Name (ftp.trolltech.com:user): anonymous
# cd /qt/source
# get qtopia-core-opensource-src-4.2.0.tar.gz
# get qt-x11-opensource-src-4.2.0.tar.gz
# quit

or use the wget command:

# wget --user=anonymous ftp.trolltech.com:/qt/source/qtopia-core-opensource-src-4.2.0.tar.gz
# wget --user=anonymous ftp.trolltech.com:/qt/source/qt-x11-opensource-src-4.2.0.tar.gz

Installation

From now, we consider the variable ARMADEUS_ROOT_DIR as the root directory of the Armadeus SVN snapshot on your computer.

Copy and untar the downloaded packages into an installation folder called qt_installs:

# cd $ARMADEUS_ROOT_DIR
# mkdir qt_installs
# cp $DOWNLOAD_FOLDER/qtopia-core-opensource-src-4.2.0.tar.gz   \ 
   $DOWNLOAD_FOLDER/qt-x11-opensource-src-4.2.0.tar.gz $ARMADEUS_ROOT_DIR/qt_installs
# tar fxz qtopia-core-opensource-src-4.2.0.tar.gz
# tar fxz qt-x11-opensource-src-4.2.0.tar.gz

First you may install/update Qt 4.2 on your system if is not installed yet because you will need the Qt tools ( the designer for instance ....). Additionally you must compile and install the qvfb and qconfig tools. ....

# cd qt-x11-opensource-src-4.2.0
# ./configure
# make
# su root
# make install
# cd tools/qvfb/ ; make
# install -m 755 -p ../../bin/qvfb /usr/local/Trolltech/Qt-4.2.0/bin
# cd ../qconfig ; make
# install -m 755 -p qconfig /usr/local/Trolltech/Qt-4.2.0/bin 
# make confclean

Then as user, configure, compile the Qtopia package for the virtual frame buffer installation. Once done, install all these into the $ARMADEUS_ROOT_DIR/qt/qvfb folder

# cd qtopia-core-opensource-src-4.2.0
# ./configure -depths 8,16,32 -no-cups -release  -qvfb -prefix \
   $ARMADEUS_ROOT_DIR/qt/qvfb -no-qt3support
# make
# su root
# make install
# make confclean

Now, as user, the essential: Qtopia

# ./configure -embedded arm -little-endian -depths 8,16,32 -no-cups -release \
   -fast -qconfig medium -prefix $ARMADEUS_ROOT_DIR/qt/qtopia.4.2.0
# make
# make install

Note: the compilation/installation of the Qtopia demos may not work, but all the Qt libraries are well done.

To install one or several different configurations, please read the Qt documentation included to understand the different configuration options. I advise you to preserve the qt_installs/qtopia-core-opensource-src-4.2.0 installation folder. Indeed, you may install Qtopia again in the following cases:

• You are using a new arm-linux-g++ compiler version
• You need several different installations because you are working on different projects ( For example the LCD properties are different).
• You want to add the Qt3 support
• you want to resize the Qt libraries to save some space on your rootfs.

Usage

by default Qt is installed in /usr/lib/ directory of your target rootfs before launching Qt on the target, you should set following env variables to the right value: QTDIR, LD_LIBRARY_PATH, etc... To be completed ......

How to build an application with Qtopia

Work in progress / to do list

• target installation = integration in Buildroot
• examples & demos
• Customization of the Qt libs to have a custom Qt/E library well designed for Armadeus usage.

Links

• http://www.trolltech.com
• 16 colors framebuffer with Qt: http://lists.trolltech.com/qt-embedded-interest/2003-11/msg00007.html

Cette page en français