Difference between revisions of "ALSA"

Revision as of 12:43, 8 December 2008

This page will summarize the informations to use ALSA on your Armadeus boards.

Introduction

ALSA stands for Advanced Linux Sound Architecture and provides audio and MIDI functionality to the Linux operating system. Everyone wanting to write portable & state of the art Linux applications dealing with sound should consider using ALSA.

ALSA Soc

On the APF boards we are going to use Embedded version of ALSA: ALSA Soc ->

• http://opensource.wolfsonmicro.com/node/6
• http://www.rpsys.net/openzaurus/patches/alsa/info.html
• http://alsa-project.org/main/index.php/ASoC

But for the moment only "standard" version is functionnal.

Installation

ALSA is by default installed on the standard Armadeus rootfs. Following instructions are only given if you want to change default configuration:

• On your Host select ALSA compilation in Linux configuration:

[armadeus]$ make linux26-menuconfig

Device Drivers ---> <M> Sound card support 
Device Drivers ---> <M> Sound card support ---> <M> Advanced Linux Sound Architecture
Device Drivers ---> <M> Sound card support ---> <M> Advanced Linux Sound Architecture ---> [*] ARM sound devices ---> <M> i.MX1/L TSC2102 alsa driver

<M> Advanced Linux Sound Architecture
< >   Sequencer support (NEW)
<M>   OSS Mixer API
<M>   OSS PCM (digital audio) API
[*]     OSS PCM (digital audio) API - Include plugin system (NEW)
[ ]   Dynamic device file minor numbers (NEW)
[*]   Support old ALSA API (NEW)
[ ]   Verbose procfs contents (NEW)
[ ]   Verbose printk
[ ]   Debug
[ ]   Debug
[ ]   Generic sound devices  --->
[*]   ARM sound devices  --->
[ ]   SPI sound devices  --->
[ ]   USB sound devices  --->
< >   ALSA for SoC audio support  --->

• in Buildroot configuration, select the user space packages for ALSA:

[armadeus]$ make menuconfig
Package Selection for the target-> Audio libraries:

--- Audio libraries and applications
[*]   alsa-lib
[*]     alsa-utils
        ALSA utils selection  --->
[ ]   asterisk
[*]   aumix
[ ]   libmad
---   libid3tag
---   libmad
[ ]     libmad headers in target
[ ]   libsndfile
---   libvorbis requires the package libogg to build
[*]   madplay
[ ]   mpg123

in ALSA utils selection  --->
[*] alsaconf
[*] alsactl
[*] alsamixer
[ ] amidi
[*] amixer
[*] aplay
[ ] arecord
[ ] iecset
[ ] aconnect
[ ] aplaymidi
[ ] arecordmidi
[ ] aseqdump
[ ] aseqnet
[*] speaker-test

• save your configuration and rebuild your rootfs:

[armadeus]$ make

• after reflashing your rootfs and your Linux kernel on your board, you can load ALSA drivers:

# modprobe spi_imx
# modprobe snd-imx-alsa-tsc2102
TI TSC2102 driver initializing
audio_dma_request done (8)
audio_dma_request done (9)
audio support initialized

# lsmod
Module                  Size  Used by    Not tainted
snd_imx_alsa_tsc2102     7204  0
snd_pcm                50760  1 snd_imx_alsa_tsc2102
snd_timer              14084  1 snd_pcm
snd_page_alloc          3208  1 snd_pcm
snd                    28916  3 snd_imx_alsa_tsc2102,snd_pcm,snd_timer
soundcore               3332  1 snd
tsc2102                10256  1 snd_imx_alsa_tsc2102
hwmon                    948  1 tsc2102
spi_imx                 9024  0

• if you want OSS support:

modprobe snd-pcm-oss
modprobe snd-mixer-oss

• If you want MIDI sequencer support:

modprobe snd-seq
modprobe snd-seq-device

Loading script

If you want the drivers to be loaded automatically during each boot, you can add a script in /etc/init.d/. For example:

# vi /etc/init.d/S60alsa

#!/bin/sh
  
modprobe spi_imx
modprobe snd-imx-alsa-tsc2102

# chmod a+x /etc/init.d/S60alsa

nodes creation

Automatically done by Buildroot, so only here as reference. In /dev/snd/ you should have:

mknod controlC0 c 116 0
mknod pcmC0D0c c 116 24
mknod pcmC0D0p c 116 16

Test

• Check if ALSA is running:

# cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.17.

• To check if the TSC2102 was detected as a sound chip:

# aplay -lL
default:CARD=IMX-ALSA
   ARMADEUS IMX_ALSA, imx alsa pcm
   Default Audio Device
null
   Discard all samples (playback) or generate zero samples (capture)
**** List of PLAYBACK Hardware Devices ****
card 0: IMX-ALSA [ARMADEUS IMX_ALSA], device 0: IMX PCM [imx alsa pcm]
 Subdevices: 1/1
 Subdevice #0: subdevice #0

or

# cat /proc/asound/cards
 0 [IMX-ALSA       ]: IMXALSA - ARMADEUS IMX_ALSA
                      ARMADEUS IMX_ALSA

• To play a test sound:

# aplay /usr/share/sounds/alsa/Side_Left.wav
Playing WAVE '/usr/share/sounds/alsa/Side_Left.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono

Note: the audio file Side_Left.wav can be copied from your Linux host (if not already on your rootfs)

Going further

Now that ALSA is working, you can switch to serious things ;-) ->

• PrBoom
• madplay

Links

• http://www.alsa-project.org/
• http://free-electrons.com/formations/audio
• http://alsa-project.org/main/index.php/DevEmbedded
• http://alsa.opensrc.org/index.php/WritingAnAlsaDriver + http://www.alsa-project.org/~tiwai/writing-an-alsa-driver.pdf
• http://www.linuxjournal.com/article/6735
• http://en.wikipedia.org/wiki/PCM
• Buildroot bug (aplay: set_params:1012: unable to install sw params:)