Difference between revisions of "PWM"

Revision as of 18:35, 20 December 2008

On this page, you will find usefull informations to configure and use the Pulse Width Modulation (PWM) capabilities of your APF9328 board.

Your board is capable of driving 2 PWM signals:

• one is linked to the LCD controller and allow to control the LCD backlight
• the other can be used to generate a PWM signal in several mode:
  • audio playback
  • real PWM

Configuration

First be sure to have the PWM Linux driver activated:

$ make linux26-menuconfig

And in Device Drivers ---> Armadeus specific drivers choose:

Then rebuild your system:

$ make

Installation

Either copy generated module target/linux/modules/pwm/pwm.ko to your system with TFTP or NFS or reflash the generated rootfs. For more informations.

Usage

• Load the module:

# insmod /lib/modules/2.6.23.1/extra/pwm/pwm.ko

or (if you have reflashed your rootfs):

# modprobe pwm

• Create device file if not existing (Major is dynamically allocated)

# DEV=`cat /proc/devices | grep imx-pwm | cut -d " " -f 1`; mknod /dev/pwm c $DEV 0

PWM Mode

Remark:

• The pwm has a resolution of 1uS

Now you have access to /sys/class/pwm/ functionnalities:

• to change frequency (for example 500 Hz):

# echo 500 > /sys/class/pwm/pwm0/frequency

• to change period (for example 100us):

# echo 100 > /sys/class/pwm/pwm0/period

• to change duty cycle (for example 50.0%)

# echo 500 > /sys/class/pwm/pwm0/duty

• to activate PWM:

# echo 1 > /sys/class/pwm/pwm0/active

• to de-activate PWM:

# echo 0 > /sys/class/pwm/pwm0/active

Audio Mode

Audio playback mode is working since v0.5 of PWM driver (thanks to User:SebastienR). You can play 8, 16 & 32 KHz 8bit linear RAW sound. It's recommended to play 8kHz one, as they use less CPU ressources. To convert a sound to the right format we recommend to use SoX (on Linux). For exemple:

[host]$ sox /usr/share/sounds/KDE_Chimes_1.ogg -r 8192 -b -u -c 1 Chimes.raw
-r -> sampling rate
-b -> byte/8bit signal
-u -> linear /not compressed
-c 1 -> Mono / 1 channel

Then you can test it using target/linux/modules/pwm/test/testplaymode:

[host:/.../armadeus]$ make -C target/linux/modules/pwm/test/
[host:/.../armadeus]$ cp target/linux/modules/pwm/test/testplaymode $NFS_DIR
[host:/.../armadeus]$ cp target/linux/modules/pwm/test/KDE_Startup_2.raw $NFS_DIR

on target do:

# testplaymode

or

# testplaymode KDE_Startup_2.raw

Links

• SoX, sound format converter
• http://en.wikipedia.org/wiki/Pulse-width_modulation