Difference between revisions of "Boa"
m (→Enable hostname resolution) |
m (→Test the result) |
||
| Line 80: | Line 80: | ||
$ make | $ make | ||
| − | Then [[Target_Software_Installation | update the rootfs]] on your board. < | + | Then [[Target_Software_Installation | update the rootfs]] on your board. Restart it, and start Boa |
| − | + | <pre class=apf> | |
| − | + | # boa | |
| − | + | </pre> | |
| − | + | ||
| − | + | ||
To access to your web page, use a browser: | To access to your web page, use a browser: | ||
| Line 95: | Line 93: | ||
<br /> | <br /> | ||
<br /> | <br /> | ||
| − | |||
== Working with cgi == | == Working with cgi == | ||
Revision as of 12:31, 28 January 2009
How install and configure the Boa Web server on your Armadeus board
Contents
Installation
- Launch Buildroot's configuration:
$ make menuconfig
- Select: Package Selection for the Target -> Networking -> boa
- Save the configuration
- Then build the binaries and the default filesystem. This will be usefull later to perform the configuration :
$ make
Configuration
Generalities
To apply a permanent configuration, be sure to not change anything on the board filesystem: that would be erased the next time you reflash the rootfs.
Instead, do all changes on the filesystem located on the Host, i.e. on buildroot/project_build_armv4t/apf9328/root/ for the APF9328 or buildroot/project_build_armv5te/apf27/root/ for the APF27.
The Boa configuration file is located in /etc/boa/boa.conf on the board; this means that to permanently change the configuration, you need to edit the file buildroot/project_build_armvXX/apfXX/root/etc/boa/boa.conf on the Host.
As the root directory name is dependent of the target, there is a way to find it automatically:
$ make shell_env && source armadeus_env.sh
Then the directory can be accessed with $ARMADEUS_ROOTFS_DIR.
Create a Dummy page
By default, DocumentRoot is set to /var/www, so let's add a dummy file here to test our configuration:
$ mkdir $ARMADEUS_ROOTFS_DIR/var/www $ vim $ARMADEUS_ROOTFS_DIR/var/www/index.html
And fill the file with:
<html>
<head>
<title> Welcome on the Armadeus Board </title>
</head>
<body>
<nowiki><h1> Welcome on the Armadeus Board </h1></nowiki>
</body>
</html>
Enable hostname resolution
Boa has to be able to resolve the hostname to work, so let's do:
$ echo "127.0.0.1 `cat $ARMADEUS_ROOTFS_DIR/etc/hostname`" >> $ARMADEUS_ROOTFS_DIR/etc/hosts
Create the access log directory
By default, boa logs will be stored in /var/log/boa/ on the card. If you did not change this setting, you will need to perform the following :
$ls -l buildroot/project_build_armv4t/apf9328/root/var/log/
If this is a link to /tmp, then
$ rm -f buildroot/project_build_armv4t/apf9328/root/var/log/ && mkdir buildroot/project_build_armv4t/apf9328/root/var/log/
Then, create the boa directory :
$ mkdir buildroot/project_build_armv4t/apf9328/root/var/log/boa
Why shoud I delete the symbolink link ?
This is because during the filesystem creation, mkfs.jffs2 will keep the link from /var/log to /tmp on the board.
Thus, once on the board, you will have :
# ls -l /var/log lrwxrwxrwx 1 root root 4 Apr 15 2007 /var/log -> /tmp
With a such behavior, even if you fill the directory buildroot/project_build_armv4t/apf9328/root/var/log/ on your host (which actually fill /tmp on your host), nothing will be saved once the filesystem will be flashed on your board.
Test the result
Create the final rootfs :
$ make
Then update the rootfs on your board. Restart it, and start Boa
# boa
To access to your web page, use a browser:
http://<your IP Address>/
You sould see the page !
If not, check the file /var/log/boa/error_log on your board
Working with cgi
- First, check the boa.conf file. Once more, you should use the one located on your host before changing anything.
$ vi buildroot/project_build_armv4t/apf9328/root/etc/boa/boa.conf
- Be sure to have an uncommented line like this :
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
- Now; let's write a dummy cgi :
$ mkdir buildroot/project_build_armv4t/apf9328/root/usr/lib/cgi-bin $ vi buildroot/project_build_armv4t/apf9328/root/usr/lib/cgi-bin/get_ipconfig.sh
- And add the following :
#!/bin/sh
echo -e "Content-type: text/html\r\n\r\n";
echo -e `/sbin/ifconfig eth0 | grep 'inet addr'`;
The script have to be executable:
$ chmod a+x buildroot/project_build_armv4t/apf9328/root/usr/lib/cgi-bin/get_ipconfig.sh
- Then change your index.html page to add a link to the cgi:
$ vi buildroot/project_build_armv4t/apf9328/root/var/www/index.html
<html>
<head>
<title> Welcome on the Armadeus Board </title>
</head>
<body>
<nowiki><h1> Welcome on the Armadeus Board </h1></nowiki>
<nowiki><br /></nowiki>
<nowiki><br /></nowiki>
<nowiki><a href=http://<Your IP Address>/cgi-bin/get_ipconfig.sh> Get the board ip config </a></nowiki>
<nowiki><br /></nowiki>
</body>
</html>
- Create the new rootfs :
$ make
- Finally, Transfer the rootfs to the board & flash it.
You can now access to the new web page and click on the cgi link !
