Difference between revisions of "Serial Transfer"
m |
(cleanup) |
||
| Line 11: | Line 11: | ||
* Target: | * Target: | ||
Modify your Buildroot configuration: | Modify your Buildroot configuration: | ||
| − | + | <pre class="host"> | |
| + | $ make menuconfig | ||
| + | </pre> | ||
to add lrzsz package:<br> | to add lrzsz package:<br> | ||
[[Image:Menuconfig_package.png]] | [[Image:Menuconfig_package.png]] | ||
[[Image:Menuconfig_package_net.png]] | [[Image:Menuconfig_package_net.png]] | ||
| + | <pre class="config"> | ||
| + | [*] lrzsz | ||
| + | </pre> | ||
| + | and then rebuild your rootfs: | ||
| + | <pre class="host"> | ||
| + | $ make | ||
| + | </pre> | ||
| − | + | Reflash it or manually copy ''rz'' and ''sz'' executables found in ''$ARMADEUS_ROOTFS_DIR/usr/bin/''. | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
* Host: | * Host: | ||
Install lrzsz package, if not already installed on your system. For example on Ubuntu/Debian: | Install lrzsz package, if not already installed on your system. For example on Ubuntu/Debian: | ||
| − | + | $ sudo apt-get install lrzsz | |
==Usage== | ==Usage== | ||
Revision as of 08:35, 24 June 2009
Instructions to use the serial port of your Armadeus board to transfer files from/to your PC.
 |
Note: This page explains how to transfer files on the board when the Linux system has started, not from U-Boot !.
To know how to configure serial link for U-Boot communication, it's here. |
Contents
Introduction
When you only have a serial link (RS232/USB) as connection with your devt PC (ie no Ethernet available), then you can use Zmodem protocol to send/receive files to/from your Shell/Console of your Armadeus board.
Installation
- Target:
Modify your Buildroot configuration:
$ make menuconfig
to add lrzsz package:
[*] lrzsz
and then rebuild your rootfs:
$ make
Reflash it or manually copy rz and sz executables found in $ARMADEUS_ROOTFS_DIR/usr/bin/.
- Host:
Install lrzsz package, if not already installed on your system. For example on Ubuntu/Debian:
$ sudo apt-get install lrzsz
Usage
You must use minicom as serial terminal and not kermit for the moment sorry ! :-(
Be sure to have correctly configured Minicom: line speed, 8N1, no control, and correct download/upload directories path.
After having booted your Armadeus system, launch rz for receiving and sz to send files:
- On your Target, open a new terminal:
# /sbin/getty -L ttygserial 115200 vt100
- On your Host, launch Minicom and configure it to use /dev/ttyUSB1 at 115200, then connect it to this terminal
Host --> Target
# cd /whereToPutTheFileOnTheTarget/ # rz -bZ .. waiting to receive.
then in minicom do: Ctrl+A , s and choose zmodem protocol and the file to send.
Wait a little and your file will be copied to your board rootfs ! ;-)
Target --> Host
# cd /whereIsTheFileToSendOnTheTarget/ # sz -b --zmodem filename
Minicom handles the file receiving automatically (put it in your $HOME by default)
