Difference between revisions of "Bluetooth"
From ArmadeusWiki
(add table for tested hardware) |
m (→Tested hardware) |
||
| Line 17: | Line 17: | ||
|| | || | ||
|---------------- | |---------------- | ||
| − | |'''Trust''' || style="background:#ffff00;" | TBT || style="background:#ff0000;" | KO || Product: BCM2046B1 <br> Manufacturer: Broadcom || | + | |'''Trust''' [[Image:Trust_Small_Bluetooth.jpg]] || style="background:#ffff00;" | TBT || style="background:#ff0000;" | KO || Product: BCM2046B1 <br> Manufacturer: Broadcom || |
|---------------- | |---------------- | ||
|'''...''' || style="background:#ff0000;" |KO || ||NA || | |'''...''' || style="background:#ff0000;" |KO || ||NA || | ||
Revision as of 18:01, 8 April 2010
Page under construction...
Informations on this page are not guaranteed !!
This page will give you all the informations needed to have a running Bluetooth configuration on your Armadeus board.
Contents
Hardware
First you have to get a compatible hardware. Currently there are 3 solutions:
- Get a Wireless extension board from armadeus systems (only available for APF27)
- Get a cheap USB<->Bluetooth adapter (requires an USB Host port)
- Get a RS232<->Bluetooth adapter
Tested hardware
| Model | Status APF9328 / APF27 |
Chipset | Comments | |
|---|---|---|---|---|
Belkin - Mini Bluetooth Adapter  |
TBT | KO | Product: BLUETOOTH USB +EDR ADAPTER v2.1 UHE Manufacturer: Broadcom Corp |
|
Trust  |
TBT | KO | Product: BCM2046B1 Manufacturer: Broadcom |
|
| ... | KO | NA | ||
Software
Bluetooth Linux stack is divided into several parts:
- kernel drivers
- userland libraries/daemon (bluez)
Driver installation
- (Done by default on APF27)
$ make linux26-menuconfig
[*] Networking support --->
<M> Bluetooth subsystem support --->
--- Bluetooth subsystem support
<M> L2CAP protocol support
<M> SCO links support
<M> RFCOMM protocol support
[*] RFCOMM TTY support
<M> BNEP protocol support
[ ] Multicast filter support (NEW)
[ ] Protocol filter support (NEW)
<M> HIDP protocol support
Bluetooth device drivers --->
<M> HCI USB driver
< > HCI SDIO driver (NEW)
<M> HCI UART driver
[*] UART (H4) protocol support
[*] BCSP protocol support
[ ] HCILL protocol support (NEW)
< > HCI BCM203x USB driver (NEW)
< > HCI BPA10x USB driver (NEW)
< > HCI BlueFRITZ! USB driver (NEW)
< > HCI VHCI (Virtual HCI device) driver (NEW)
$ make
Bluez installation
$ make menuconfig
Package Selection for the target --->
...
[*] XML handling --->
[*] libxml2
...
[*] Hardware handling / blockdevices and filesystem maintenance --->
[*] dbus
XML library to use (libxml2)
...
*** Armadeus specific packages ***
[*] bluez
$ make
