Difference between revisions of "URG laser"
From ArmadeusWiki
(→Usage) |
(→Usage) |
||
| Line 20: | Line 20: | ||
To use Hokoyu URG laser, you need Prolific pl2303 USB to serial adapter ( [[USB_to_serial_adapter | see here to install pl2303]]). | To use Hokoyu URG laser, you need Prolific pl2303 USB to serial adapter ( [[USB_to_serial_adapter | see here to install pl2303]]). | ||
| + | |||
Load the module and connect the URG laser to APF27 dev USB port. You should see something like this : | Load the module and connect the URG laser to APF27 dev USB port. You should see something like this : | ||
<pre class="apf"> | <pre class="apf"> | ||
Revision as of 20:15, 15 July 2010
How to drive Hoyuko's URG series laser sensors.
Contents
Installation
$ make menuconfig
Package Selection for the target --->
Hardware handling / blockdevices and filesystem maintenance --->
[*] urg library
$ make
- reflash rootfs
Usage
To use Hokoyu URG laser, you need Prolific pl2303 USB to serial adapter ( see here to install pl2303).
Load the module and connect the URG laser to APF27 dev USB port. You should see something like this :
# modprobe pl2303 usbcore: registered new interface driver usbserial usbserial: USB Serial Driver core USB Serial support registered for pl2303 usbcore: registered new interface driver pl2303 pl2303: Prolific PL2303 USB to serial adaptor driver # usb 2-1: new full speed USB device using mxc-ehci and address 3 usb 2-1: device descriptor read/64, error -71 usb 2-1: New USB device found, idVendor=15d1, idProduct=0000 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: URG-Series USB Driver usb 2-1: Manufacturer: Hokuyo Data Flex for USB usb 2-1: configuration #1 chosen from 1 choice cdc_acm 2-1:1.0: ttyACM0: USB ACM device #
