Difference between revisions of "DVI / HDMI"
From ArmadeusWiki
(→APF27DevFull) |
|||
| Line 6: | Line 6: | ||
===APF27DevFull=== | ===APF27DevFull=== | ||
| − | * Starting from armadeus-3.2 release or in recent GIT checkout, the needed driver is now installed by default. | + | * Starting from armadeus-3.2 release or in recent GIT checkout, the needed driver is now installed by default. Informations are kept here as reference. |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
==Usage== | ==Usage== | ||
Revision as of 22:03, 6 June 2011
How to use the HDMI/DVI output of the APF27DevFull and APF51Dev development boards.
Contents
Driver installation
APF51Dev
- Nothing has to be done
APF27DevFull
- Starting from armadeus-3.2 release or in recent GIT checkout, the needed driver is now installed by default. Informations are kept here as reference.
Usage
APF27DevFull
- Load the module:
# modprobe ad9889
APF51Dev
- Start the utility:
tfp410ctrl
Then press 'Q' to exit
Quick DVI test
Connect a HDMI<->DVI cable between the APFxxDev board and a PC monitor with a DVI input or use a HDMI<->HDMI cable if your display has this kind of refinement. The Linux console must appear on the monitor.
