Difference between revisions of "TSC2102 Linux driver"
From ArmadeusWiki
(→Links) |
m (→Usage) |
||
| (62 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
| − | ==Installation== | + | This page details the installation and the usage of the Linux drivers for the [[TSC2102|TSC210x chips]] (touch & temp/voltage control). Sound (ALSA) specific part [[ALSA|can be found here.]] |
| − | + | ||
| + | ==Driver Installation== | ||
| + | These drivers are now installed by default in standard Armadeus rootfs. [[Talk:TSC2102_Linux_driver|Here]] you will find instructions to know how we configured Linux to activate these drivers (may be useful if you want to deactivate them). | ||
==Architecture== | ==Architecture== | ||
| − | + | [[Image:TSC_arch.png]] | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
==Usage== | ==Usage== | ||
| − | * | + | * Load all the needed drivers: |
| − | + | <pre class="apf"> | |
| − | + | # modprobe tsc2102_ts | |
| + | TI TSC210x driver initializing | ||
| + | TSC2101 detected | ||
| + | input: TSC210x Touchscreen as /devices/platform/mxc_spi.1/spi1.0/tsc210x-ts/input/input0 | ||
| + | TSC210x Touchscreen driver initialized | ||
| + | </pre> | ||
| + | |||
| + | ===Touchscreen=== | ||
| + | Before use, the touchscreen has to be (at least one time) calibrated: | ||
| + | <pre class="apf"> | ||
| + | # ts_calibrate | ||
| + | </pre> | ||
| + | [[Image:Tslib_calibrate.png]] | ||
| + | |||
| + | Then it can be tested with: | ||
| + | <pre class="apf"> | ||
| + | # ts_test | ||
| + | </pre> | ||
| + | [[Image:Tslib_test.png]] | ||
| + | |||
| + | If it does not work you can quickly check driver functionality; touch the screen and check that tsc2102 interrupts count is increasing: | ||
| + | <pre class="apf"> | ||
| + | # cat /proc/interrupts | ||
| + | CPU0 | ||
| + | 26: 0 MPU IMX-uart | ||
| + | 29: 17 MPU IMX-uart | ||
| + | 30: 22 MPU IMX-uart | ||
| + | 35: 12 MPU imx-mmc | ||
| + | 39: 14 MPU I2C_IMX | ||
| + | 40: 16 MPU imx-spi.2 | ||
| + | 41: 0 MPU imx-spi.1 | ||
| + | 59: 3682 MPU i.MX Timer Tick | ||
| + | 60: 0 MPU DMA | ||
| + | 61: 0 MPU DMA | ||
| + | 110: 0 GPIO eth0 | ||
| + | 168: 0 GPIO tsc2102 <<<<-------- | ||
| + | Err: 0 | ||
| + | # | ||
| + | </pre> | ||
| + | |||
| + | More informations concerning the Tslib can be found [[tslib | here]]. | ||
| + | |||
| + | ===Audio=== | ||
| + | |||
| + | You can play sounds through [[ALSA| ALSA interface]]. | ||
| + | |||
| + | ===Miscellaneous=== | ||
| + | * get temperature and voltage with [http://lxr.linux.no/source/Documentation/hwmon/sysfs-interface?v=2.6.18 hwmon] (Hardware Monitoring) interface. For example, get board temperature from TSC210x: | ||
| + | <pre class="apf"> | ||
| + | # modprobe hwmon | ||
| + | # cat /sys/class/hwmon/hwmon0/device/temp1_input -- result in m°C | ||
| + | </pre> | ||
==Links== | ==Links== | ||
| − | * http://source.mvista.com/git/gitweb.cgi?p=linux-omap-2.6.git;a=log;t=7 | + | * [http://source.mvista.com/git/gitweb.cgi?p=linux-omap-2.6.git;a=log;t=7 Driver for OMAP] (search for TSC2102) |
| + | * [http://www.avr32linux.org/archives/kernel/2007-August/000209.html Driver for AVR32] | ||
* http://osdir.com/ml/linux.ports.arm.omap/2006-08/msg00183.html | * http://osdir.com/ml/linux.ports.arm.omap/2006-08/msg00183.html | ||
* [http://docs.blackfin.uclinux.org/doku.php?id=touchscreen Touchscreen usage on Blackfin] | * [http://docs.blackfin.uclinux.org/doku.php?id=touchscreen Touchscreen usage on Blackfin] | ||
| Line 26: | Line 72: | ||
* http://www.opentom.org/Tslib | * http://www.opentom.org/Tslib | ||
* http://www.openembedded.org/filebrowser/org.openembedded.packaged-staging/packages/tslib | * http://www.openembedded.org/filebrowser/org.openembedded.packaged-staging/packages/tslib | ||
| + | |||
| + | [[Category:Linux drivers]] | ||
| + | [[Category:Touchscreen]] | ||
Latest revision as of 01:45, 10 August 2011
This page details the installation and the usage of the Linux drivers for the TSC210x chips (touch & temp/voltage control). Sound (ALSA) specific part can be found here.
Contents
Driver Installation
These drivers are now installed by default in standard Armadeus rootfs. Here you will find instructions to know how we configured Linux to activate these drivers (may be useful if you want to deactivate them).
Architecture
Usage
- Load all the needed drivers:
# modprobe tsc2102_ts TI TSC210x driver initializing TSC2101 detected input: TSC210x Touchscreen as /devices/platform/mxc_spi.1/spi1.0/tsc210x-ts/input/input0 TSC210x Touchscreen driver initialized
Touchscreen
Before use, the touchscreen has to be (at least one time) calibrated:
# ts_calibrate
Then it can be tested with:
# ts_test
If it does not work you can quickly check driver functionality; touch the screen and check that tsc2102 interrupts count is increasing:
# cat /proc/interrupts
CPU0
26: 0 MPU IMX-uart
29: 17 MPU IMX-uart
30: 22 MPU IMX-uart
35: 12 MPU imx-mmc
39: 14 MPU I2C_IMX
40: 16 MPU imx-spi.2
41: 0 MPU imx-spi.1
59: 3682 MPU i.MX Timer Tick
60: 0 MPU DMA
61: 0 MPU DMA
110: 0 GPIO eth0
168: 0 GPIO tsc2102 <<<<--------
Err: 0
#
More informations concerning the Tslib can be found here.
Audio
You can play sounds through ALSA interface.
Miscellaneous
- get temperature and voltage with hwmon (Hardware Monitoring) interface. For example, get board temperature from TSC210x:
# modprobe hwmon # cat /sys/class/hwmon/hwmon0/device/temp1_input -- result in m°C
