Difference between revisions of "HelloWorld"
From ArmadeusWiki
(→TFTP) |
(→Putting it all together in a Makefile) |
||
| (5 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | |||
On this page you will learn how to create your first C application for your Armadeus board | On this page you will learn how to create your first C application for your Armadeus board | ||
| Line 17: | Line 16: | ||
</source> | </source> | ||
| − | *Save it as ''hello.c'' in | + | *Save it as ''hello.c'' in YOUR_ARMADEUS_PROJECT_PATH/target/demos/ directory. |
==Compilation== | ==Compilation== | ||
| Line 34: | Line 33: | ||
So to compile your small program (here ''hello.c'' was saved in ''armadeus/target/demos/'' directory) do: | So to compile your small program (here ''hello.c'' was saved in ''armadeus/target/demos/'' directory) do: | ||
<pre class="host"> | <pre class="host"> | ||
| − | $ cd | + | $ cd YOUR_ARMADEUS_PROJECT_PATH/target/demos/ |
$ $ARMADEUS_TOOLCHAIN_PATH/arm-linux-gcc -o hello hello.c | $ $ARMADEUS_TOOLCHAIN_PATH/arm-linux-gcc -o hello hello.c | ||
</pre> | </pre> | ||
| Line 40: | Line 39: | ||
<pre class="host"> | <pre class="host"> | ||
$ export PATH=$PATH:$ARMADEUS_TOOLCHAIN_PATH | $ export PATH=$PATH:$ARMADEUS_TOOLCHAIN_PATH | ||
| − | $ cd | + | $ cd YOUR_ARMADEUS_PROJECT_PATH/target/demos/ |
$ arm-linux-gcc -o hello hello.c | $ arm-linux-gcc -o hello hello.c | ||
</pre> | </pre> | ||
| Line 85: | Line 84: | ||
==Putting it all together in a Makefile== | ==Putting it all together in a Makefile== | ||
You can put your program compiling and copying in a ''Makefile'' to make things cleaner: | You can put your program compiling and copying in a ''Makefile'' to make things cleaner: | ||
| − | <source lang=" | + | <source lang="make"> |
CC=arm-linux-gcc | CC=arm-linux-gcc | ||
CFLAGS=-W -Wall | CFLAGS=-W -Wall | ||
| Line 116: | Line 115: | ||
Then, just do: | Then, just do: | ||
<pre class="host"> | <pre class="host"> | ||
| − | + | $ make clean install | |
</pre> | </pre> | ||
Latest revision as of 20:14, 22 September 2015
On this page you will learn how to create your first C application for your Armadeus board
Contents
Source code
- First take your favorite editor/IDE and create the following program:
#include <stdio.h>
#include <stdlib.h>
int main(int argc, char *argv[])
{
printf( "APF says: Hello World ! ;-)\n" );
exit(0);
}
- Save it as hello.c in YOUR_ARMADEUS_PROJECT_PATH/target/demos/ directory.
Compilation
The C cross compiler is installed in buildroot/output/host/usr/bin/ and is named arm-linux-gcc. You can access it with the $ARMADEUS_TOOLCHAIN_PATH environment variable:
$ cd YOUR_ARMADEUS_PROJECT_PATH/ $ make shell_env $ source ./armadeus_env.sh $ echo $ARMADEUS_TOOLCHAIN_PATH
There are 2 possibilities to use it:
- either add $ARMADEUS_TOOLCHAIN_PATH to your PATH environment variable and then call arm-linux-gcc instead of gcc
- or call directly $ARMADEUS_TOOLCHAIN_PATH/arm-linux-gcc
So to compile your small program (here hello.c was saved in armadeus/target/demos/ directory) do:
$ cd YOUR_ARMADEUS_PROJECT_PATH/target/demos/ $ $ARMADEUS_TOOLCHAIN_PATH/arm-linux-gcc -o hello hello.c
or
$ export PATH=$PATH:$ARMADEUS_TOOLCHAIN_PATH $ cd YOUR_ARMADEUS_PROJECT_PATH/target/demos/ $ arm-linux-gcc -o hello hello.c
Running
Copy your hello executable on your board either through TFTP or NFS
TFTP
- Be sure to have TFTP server installed, if not it's explained here. Copy hello to your TFTP directory:
$ cp hello /tftpboot/
- Load your executable on the target (here my host IP is 192.168.0.2):
# tftp -g -r hello -l /usr/bin/hello 192.168.0.2
- Give it executable rights, if lost during TFTP transfer:
# chmod a+x /usr/bin/hello
- Launch it:
# /usr/bin/hello APF says: Hello World ! ;-) #
Now it's up to you ! ;-)
NFS
- Be sure to have NFS server installed, if not it's explained here. I now assume that your server has 192.168.0.2 as IP address and /local/exports/ as NFS export directory.
- Copy your executable:
$ cp hello /local/exports/
- Mount NFS on your target (I assume that your NFS drive is accessible from /mnt/host on the target):
# mount -t nfs 192.168.0.2:/local/exports /mnt/host
- Launch your prog:
# /mnt/host/hello
Putting it all together in a Makefile
You can put your program compiling and copying in a Makefile to make things cleaner:
CC=arm-linux-gcc
CFLAGS=-W -Wall
LDFLAGS=
EXEC=hello
SRC=$(wildcard *.c)
OBJ=$(SRC:.c=.o)
all: $(EXEC)
$(EXEC): $(OBJ)
$(CC) -o $@ $^ $(LDFLAGS)
%.o: %.c
$(CC) -o $@ -c $< $(CFLAGS)
.PHONY: clean install
clean:
rm -rf *.o
rm -f $(EXEC)
install: all
cp -f $(EXEC) /tftpboot/
 |
Warning: If you do a cut & paste with previous commands, don't forget to check TABS for each target (Makefiles are using TABS and not SPACES) !! In that case make will complains about a missing separator line 11 |
Then, just do:
$ make clean install
