Difference between revisions of "How to use vanilla kernel on APF28"
From ArmadeusWiki
SebastienSz (Talk | contribs) |
|||
| (8 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
| + | [[Category: kernel]] | ||
| + | |||
By default, the kernel for APF28 is the 2.6.35 version (from Freescale BSP). | By default, the kernel for APF28 is the 2.6.35 version (from Freescale BSP). | ||
| − | Migration to '''Mainline (3. | + | Migration to '''Mainline (3.1x+)''' is in progress but not finished, this article explains how to use (test) these kernels with latest armadeus master branch. |
Mainline support is done with [[Kernel-with-device-tree|Device Tree]]. | Mainline support is done with [[Kernel-with-device-tree|Device Tree]]. | ||
==Lazy guys instructions== | ==Lazy guys instructions== | ||
| − | * Get the latest | + | * Get the latest master version with command : |
<pre class="host"> | <pre class="host"> | ||
| − | $ git clone git://git.code.sf.net/p/armadeus/code armadeus- | + | $ git clone git://git.code.sf.net/p/armadeus/code armadeus-master |
</pre> | </pre> | ||
* Configure the view for APF28 "mainline" : | * Configure the view for APF28 "mainline" : | ||
<pre class="host"> | <pre class="host"> | ||
| − | $ cd armadeus- | + | $ cd armadeus-master |
$ make apf28mainline_defconfig | $ make apf28mainline_defconfig | ||
</pre> | </pre> | ||
| Line 21: | Line 23: | ||
BIOS> run flash_reset_env; reset | BIOS> run flash_reset_env; reset | ||
BIOS> setenv fdt_addr_r 41000000 | BIOS> setenv fdt_addr_r 41000000 | ||
| + | BIOS> setenv consoledev ttyAMA0 | ||
BIOS> saveenv | BIOS> saveenv | ||
BIOS> run update_dtb | BIOS> run update_dtb | ||
| Line 29: | Line 32: | ||
== For the one who wants to know the details == | == For the one who wants to know the details == | ||
| − | * Get the latest | + | * Get the latest master branch version with command : |
<pre class="host"> | <pre class="host"> | ||
| − | $ git clone git://git.code.sf.net/p/armadeus/code armadeus- | + | $ git clone git://git.code.sf.net/p/armadeus/code armadeus-master |
</pre> | </pre> | ||
* Configure the view for APF28 : | * Configure the view for APF28 : | ||
<pre class="host"> | <pre class="host"> | ||
| − | $ cd armadeus- | + | $ cd armadeus-master |
$ make apf28_defconfig | $ make apf28_defconfig | ||
</pre> | </pre> | ||
| Line 61: | Line 64: | ||
</pre> | </pre> | ||
| − | == U-Boot modification == | + | === U-Boot modification === |
| − | * Linux nand driver has changed on kernel 3.8, then U-Boot code must be modified to match it. | + | * Linux nand driver has changed on kernel 3.8, then U-Boot code must be modified to match it (maybe now no more needed, since 3.12 ??). |
** Edit file : | ** Edit file : | ||
<pre class="config"> | <pre class="config"> | ||
| Line 83: | Line 86: | ||
* Serial port used for console has now a different name: ttyAMA0. So if you want to see something on your serial console please do the following before booting: | * Serial port used for console has now a different name: ttyAMA0. So if you want to see something on your serial console please do the following before booting: | ||
<pre class="apf"> | <pre class="apf"> | ||
| − | |||
BIOS> setenv consoledev ttyAMA0 | BIOS> setenv consoledev ttyAMA0 | ||
</pre> | </pre> | ||
| Line 105: | Line 107: | ||
==Which devices are supported ?== | ==Which devices are supported ?== | ||
| − | * [[ | + | * [[Kernel-upstream-status]] |
==Roadmap== | ==Roadmap== | ||
# SPI | # SPI | ||
# touchscreen | # touchscreen | ||
Latest revision as of 16:07, 28 March 2017
By default, the kernel for APF28 is the 2.6.35 version (from Freescale BSP).
Migration to Mainline (3.1x+) is in progress but not finished, this article explains how to use (test) these kernels with latest armadeus master branch.
Mainline support is done with Device Tree.
Contents
Lazy guys instructions
- Get the latest master version with command :
$ git clone git://git.code.sf.net/p/armadeus/code armadeus-master
- Configure the view for APF28 "mainline" :
$ cd armadeus-master $ make apf28mainline_defconfig
- Update your board:
BIOS> run update_uboot; reset BIOS> run flash_reset_env; reset BIOS> setenv fdt_addr_r 41000000 BIOS> setenv consoledev ttyAMA0 BIOS> saveenv BIOS> run update_dtb BIOS> run update_kernel BIOS> run update_rootfs
For the one who wants to know the details
- Get the latest master branch version with command :
$ git clone git://git.code.sf.net/p/armadeus/code armadeus-master
- Configure the view for APF28 :
$ cd armadeus-master $ make apf28_defconfig
- On menuconfig select :
Toolchain --->
Kernel Headers (Linux 2.6 (manually specified version)) --->
(3.8) linux version
...
System configuration --->
(ttyAMA0) Port to run a getty (login prompt) on
...
Kernel --->
(3.8) Kernel version
(40008000) load address (for 3.7+ multi-platform image)
(../patches/linux/$(BR2_LINUX_KERNEL_VERSION)) Custom kernel patches
(imx28-apf28dev) Device Tree Source file names
- Then build :
$ make
U-Boot modification
- Linux nand driver has changed on kernel 3.8, then U-Boot code must be modified to match it (maybe now no more needed, since 3.12 ??).
- Edit file :
buildroot/target/device/armadeus/apf28/apf28-u-boot-2013.04.h
- And change line 153:
#define CONFIG_MTDMAP "gpmi-nand"
- Then re-build U-Boot:
make uboot-dirclean; make uboot;
- you will have to reflash U-Boot on your APF28 and probably cleanup your environment variables:
BIOS> run flash_reset_env
- Serial port used for console has now a different name: ttyAMA0. So if you want to see something on your serial console please do the following before booting:
BIOS> setenv consoledev ttyAMA0
- Kernel 3.8 use device tree, then this paramter must be set too:
BIOS> setenv fdt_addr_r 41000000 BIOS> saveenv
- To boot with NFS boot use:
BIOS> run nfsboot
- But nand boot work now, just don't forget to update the dtb (if you run update_all it's already done):
BIOS> run update_dtb BIOS> boot
Which devices are supported ?
Roadmap
- SPI
- touchscreen
