Difference between revisions of "OPOS6UL"
From ArmadeusWiki
(→Description) |
(→Description) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 15: | Line 15: | ||
* USB: High speed Host | * USB: High speed Host | ||
* TFT CMOS/LVDS interface | * TFT CMOS/LVDS interface | ||
| − | * Wi-Fi (option): b/g/n with u.FL antenna ( | + | * Wi-Fi+Bluetooth (option): b/g/n with u.FL antenna (BCM43438 chip), BT 4.1 (Low Energy compatible) |
| − | + | ||
* Only one external supply of 3.3V required. | * Only one external supply of 3.3V required. | ||
* Mechanical dimensions: 67.6 x 30 mm | * Mechanical dimensions: 67.6 x 30 mm | ||
| Line 24: | Line 23: | ||
* [[Datasheet#OPOS6UL | Datasheet and schematics]] | * [[Datasheet#OPOS6UL | Datasheet and schematics]] | ||
| + | |||
| + | ==Workaround== | ||
| + | * When you get that kind of error at Wi-Fi initialisation: | ||
| + | <pre class="apf"> | ||
| + | brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 | ||
| + | </pre> | ||
| + | * You can try to unload/reload the driver: | ||
| + | <pre class="apf"> | ||
| + | # modprobe -r brcmfmac | ||
| + | # modprobe brcmfmac | ||
| + | [ 1881.792273] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Aug 29 2016 20:48:16 version 7.45.41.26 (r640327) FWID 01-4527cfab | ||
| + | [ 1881.850588] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30) | ||
| + | </pre> | ||
==Feature list== | ==Feature list== | ||
| Line 54: | Line 66: | ||
===Wireless communication=== | ===Wireless communication=== | ||
| − | |||
* [[Wifi|Wi-Fi usage on Linux]] | * [[Wifi|Wi-Fi usage on Linux]] | ||
* [[Bluetooth|Bluetooth usage on Linux]] | * [[Bluetooth|Bluetooth usage on Linux]] | ||
Latest revision as of 19:45, 1 March 2018
Contents
Description
The OPOS6UL is a Single Board Computer.
Here is a list of the main features:
- Processor: i.MX6UL (i.MX6UL single A7 @ 538MHz, 696MHz in option)
- RAM: DDR3 800Mbps. Default capacity is 256Mbytes.
- Flash: eMMC 4GBytes to 16GBytes (default 4GB), 8 bits data bus.
- Ethernet: onboard Physical (ready to use Ethernet 10/100Mbit link)
- USB: High speed USB OTG (OnTheGo)
- USB: High speed Host
- TFT CMOS/LVDS interface
- Wi-Fi+Bluetooth (option): b/g/n with u.FL antenna (BCM43438 chip), BT 4.1 (Low Energy compatible)
- Only one external supply of 3.3V required.
- Mechanical dimensions: 67.6 x 30 mm
- Connectors: SODIMM 204 pins
Resources
Workaround
- When you get that kind of error at Wi-Fi initialisation:
brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
- You can try to unload/reload the driver:
# modprobe -r brcmfmac # modprobe brcmfmac [ 1881.792273] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Aug 29 2016 20:48:16 version 7.45.41.26 (r640327) FWID 01-4527cfab [ 1881.850588] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30)
Feature list
VideoVideo OutVideo In |
Wired communication |
Wireless communicationStorageOther |
