Difference between revisions of "RS-232"
From ArmadeusWiki
m (→Usage) |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
==Usage== | ==Usage== | ||
There are 3 ways to have RS-232 compatible serial ports on your Armadeus board: | There are 3 ways to have RS-232 compatible serial ports on your Armadeus board: | ||
| − | * Use the internal | + | * [[Activate i.MX internal UARTs|Use the internal UART controllers of the i.MX(L/27) (2 on i.MXL, 6 on i.MX27)]] |
* [[OpenCore 16550 IP Linux driver | Load OpenCore serial IPs into the FPGA of your board and use it]] | * [[OpenCore 16550 IP Linux driver | Load OpenCore serial IPs into the FPGA of your board and use it]] | ||
* [[USB_to_serial_adapter | Use a USB <-> Serial adapter]] (not possible with an [[APF9328DevLight]]). | * [[USB_to_serial_adapter | Use a USB <-> Serial adapter]] (not possible with an [[APF9328DevLight]]). | ||
| + | As soon as you choosed the best solution for your application, all the serial ports are used the same way on Linux: [[Serial ports usage on Linux|go here to have more informations]]. | ||
==Links== | ==Links== | ||
* http://en.wikipedia.org/wiki/RS-232 | * http://en.wikipedia.org/wiki/RS-232 | ||
| + | |||
| + | [[Category:Hardware]] | ||
| + | [[Category:Serial ports]] | ||
Latest revision as of 17:18, 14 December 2009
RS-232 (Recommended Standard 232) is a standard for serial binary data signals connecting between a DTE (Data Terminal Equipment) and a DCE (Data Circuit-terminating Equipment).
Usage
There are 3 ways to have RS-232 compatible serial ports on your Armadeus board:
- Use the internal UART controllers of the i.MX(L/27) (2 on i.MXL, 6 on i.MX27)
- Load OpenCore serial IPs into the FPGA of your board and use it
- Use a USB <-> Serial adapter (not possible with an APF9328DevLight).
As soon as you choosed the best solution for your application, all the serial ports are used the same way on Linux: go here to have more informations.
