Difference between revisions of "Wireless extension board"
From ArmadeusWiki
m (→Using the interfaces) |
m (→Linux configuration) |
||
| (12 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
| − | This extension board from Armadeus Systems, designed to be pluggable on an [[APF27Dev]], will give your system the following wireless capabilities (depending on the options you selected): | + | This extension board ('''APW''') from Armadeus Systems, designed to be pluggable on an [[APF27Dev]], will give your system the following wireless capabilities (depending on the options you selected): |
| − | * WiFi b/g | + | * WiFi b/g and [[Bluetooth]] (Wi2Wi W2CBW003) |
| − | + | * [[GSM/GPRS]] (Sagem HiLo) | |
| − | * [[ | + | * [[GPS]] (u-blox NEO-5Q) |
| − | * [[GPS]] | + | |
| − | [[Image: | + | [[Image:apw_full.png|center|frame|'''Figure 1''': APW with all options populated (no antenna)]] |
| − | == | + | ==Linux configuration== |
| + | * Linux will have to be configured in order to tell it that an APW is connected to your APF27Dev: | ||
| + | <pre class="host"> | ||
| + | $ make linux-menuconfig | ||
| + | </pre> | ||
| + | <pre class="config"> | ||
| + | System Type ---> | ||
| + | Freescale MXC Implementations ---> | ||
| + | ... | ||
| + | Extension board (Wireless (APW)) ---> | ||
| + | [ ] GSM/GPRS Modem (NEW) | ||
| + | [ ] Bluetooth & WiFi module (NEW) | ||
| + | [ ] CSI (Camera) pass-through (NEW) | ||
| + | [ ] GPS module (NEW) | ||
| + | </pre> | ||
| + | Select the options installed on your APW board (WiFi can only be selected if SPI3 port is '''not''' selected for general purpose (SDHC1 & SPI3 are muxed)). | ||
| + | |||
| + | <pre class="host"> | ||
| + | $ make linux | ||
| + | </pre> | ||
| + | * reflash you Linux kernel | ||
| + | |||
| + | ==Features== | ||
* WiFi: use [[Libertas_driver|Linux libertas driver]] | * WiFi: use [[Libertas_driver|Linux libertas driver]] | ||
| + | * [[Bluetooth]] | ||
* [[GPS]] | * [[GPS]] | ||
* [[GSM/GPRS]] | * [[GSM/GPRS]] | ||
| + | |||
| + | ==Resources== | ||
| + | * [[Datasheet | Datasheet and schema]] | ||
| + | * [http://www.armadeus.com/english/products-peripherals-apf27_wireless.html Product page on Armadeus Systems website] | ||
| + | |||
| + | [[Category:Wireless]] | ||
| + | [[Category:Extension boards]] | ||
Latest revision as of 17:07, 4 September 2013
This extension board (APW) from Armadeus Systems, designed to be pluggable on an APF27Dev, will give your system the following wireless capabilities (depending on the options you selected):
Figure 1: APW with all options populated (no antenna)
Linux configuration
- Linux will have to be configured in order to tell it that an APW is connected to your APF27Dev:
$ make linux-menuconfig
System Type --->
Freescale MXC Implementations --->
...
Extension board (Wireless (APW)) --->
[ ] GSM/GPRS Modem (NEW)
[ ] Bluetooth & WiFi module (NEW)
[ ] CSI (Camera) pass-through (NEW)
[ ] GPS module (NEW)
Select the options installed on your APW board (WiFi can only be selected if SPI3 port is not selected for general purpose (SDHC1 & SPI3 are muxed)).
$ make linux
- reflash you Linux kernel
Features
- WiFi: use Linux libertas driver
- Bluetooth
- GPS
- GSM/GPRS
