Difference between revisions of "Wireless extension board"

From ArmadeusWiki
Jump to: navigation, search
(Linux configuration)
m (Linux configuration)
 
(One intermediate revision by one other user not shown)
Line 9: Line 9:
 
* Linux will have to be configured in order to tell it that an APW is connected to your APF27Dev:
 
* Linux will have to be configured in order to tell it that an APW is connected to your APF27Dev:
 
<pre class="host">
 
<pre class="host">
$ make linux26-menuconfig
+
$ make linux-menuconfig
 
</pre>
 
</pre>
 
<pre class="config">
 
<pre class="config">
Line 24: Line 24:
  
 
<pre class="host">
 
<pre class="host">
$ make linux26
+
$ make linux
 
</pre>
 
</pre>
 
* reflash you Linux kernel
 
* reflash you Linux kernel
Line 35: Line 35:
  
 
==Resources==
 
==Resources==
 +
* [[Datasheet | Datasheet and schema]]
 
* [http://www.armadeus.com/english/products-peripherals-apf27_wireless.html Product page on Armadeus Systems website]
 
* [http://www.armadeus.com/english/products-peripherals-apf27_wireless.html Product page on Armadeus Systems website]
* [http://www.armadeus.com/_downloads/apw/documentation/DataSheet_APW_v1.1.pdf Datasheet]
 
* [http://www.armadeus.com/_downloads/apw/hardware/apf27_wireless_V0C.pdf Schematics]
 
  
 
[[Category:Wireless]]
 
[[Category:Wireless]]
 
[[Category:Extension boards]]
 
[[Category:Extension boards]]

Latest revision as of 17:07, 4 September 2013

This extension board (APW) from Armadeus Systems, designed to be pluggable on an APF27Dev, will give your system the following wireless capabilities (depending on the options you selected):

Figure 1: APW with all options populated (no antenna)

Linux configuration

  • Linux will have to be configured in order to tell it that an APW is connected to your APF27Dev:
$ make linux-menuconfig
System Type  --->
    Freescale MXC Implementations  --->
            ...
            Extension board (Wireless (APW))  --->
       [ ] GSM/GPRS Modem (NEW)
       [ ] Bluetooth & WiFi module (NEW)
       [ ] CSI (Camera) pass-through (NEW)
       [ ] GPS module (NEW)

Select the options installed on your APW board (WiFi can only be selected if SPI3 port is not selected for general purpose (SDHC1 & SPI3 are muxed)).

$ make linux
  • reflash you Linux kernel

Features

Resources