Difference between revisions of "APF28 Linux kernel status"
From ArmadeusWiki
(→APF28Dev development baseboard) |
(→APF28Dev development baseboard) |
||
| Line 70: | Line 70: | ||
|'''Backlight''' || style="background:#00ff00;" | OK || style="background:#00ff00;" | OK || style="background:#00ff00;" | OK || || style="background:#eeee00;" | NT || style="background:#eeee00;" | NT || style="background:#eeee00;" | NT || | |'''Backlight''' || style="background:#00ff00;" | OK || style="background:#00ff00;" | OK || style="background:#00ff00;" | OK || || style="background:#eeee00;" | NT || style="background:#eeee00;" | NT || style="background:#eeee00;" | NT || | ||
|---------------- | |---------------- | ||
| − | |'''LW700 LCD''' || style="background:#00ff00;" | OK || NA || style="background:# | + | |'''LW700 LCD''' || style="background:#00ff00;" | OK || NA || style="background:#FF0000;" | KO || LCD is working but some colors are inverted || style="background:#eeee00;" | NT || style="background:#eeee00;" | NT || style="background:#eeee00;" | NT || |
|---------------- | |---------------- | ||
|'''MT035 LCD''' || style="background:#00ff00;" | OK || NA || style="background:#00ff00;" | OK || Timings to adjust || style="background:#eeee00;" | NT || style="background:#eeee00;" | NT || style="background:#eeee00;" | NT || | |'''MT035 LCD''' || style="background:#00ff00;" | OK || NA || style="background:#00ff00;" | OK || Timings to adjust || style="background:#eeee00;" | NT || style="background:#eeee00;" | NT || style="background:#eeee00;" | NT || | ||
Revision as of 00:20, 9 August 2012
The APF28 Linux distribution can be found here: latest stable installation tarball from SourceForge
Current version
Currently (in armadeus-5.0-alpha) supported Linux versions are: Freescale's 2.6.35.3 (version by default) and mainline/vanilla 3.4.2 (which requires some special instructions).
- NT = Not Tested
- NA = Not Available / Not possible
APF28 (~ i.MX28 internal controllers)
| Freescale's 2.6.35 | Mainline 3.4.2 | ||||||||
| Driver | Compiling ? Static / Module |
Working ? | Comments | Compiling ? Static / Module |
Working ? | Comments | |||
|---|---|---|---|---|---|---|---|---|---|
| NAND Flash | OK | NA | OK | Boot linux + rootfs | NT | ||||
| DUART | OK | NA | OK | console (ttyAM0) | OK | console (ttyAMA0) | |||
| Ethernet | OK | NA | OK | Ethernet 0 | OK | ||||
| RTC | OK | OK | OK | internal RTC | NT | ||||
| PM | OK | NA | OK | use standby mode | NT | ||||
| Battery | OK | NA | NT | NT | |||||
| Watchdog | OK | OK | OK | internal Watchdog | NT | ||||
| Security/DCP | OK | OK | OK | tested with tcrypt module | NT | ||||
APF28Dev development baseboard
- NT = Not Tested
- NA = Not Available / Not possible
| Freescale's 2.6.35 | Mainline 3.4.2 | ||||||||
| Driver | Compiling ? Static / Module |
Working ? | Comments | Compiling ? Static / Module |
Working ? | Comments | |||
|---|---|---|---|---|---|---|---|---|---|
| SPI | OK | NA | OK | NT | NT | NT | . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | ||
| I2C | OK | NA | OK | OK | OK | OK | Can't use SMBus Quick Write on bus 0 | ||
| MMC/SD/SDIO | OK | NA | OK | OK | NT | OK | |||
| AUART | OK | NA | OK | NT | NT | NT | |||
| Ethernet (1) | OK | NA | NT | 2nd optionnal Ethernet port | OK | NA | NT | 2nd optionnal Ethernet port | |
| USB OTG | OK | NA | ~OK | works when forced in Host mode | NT | NT | NT | ||
| USB HOST | OK | NA | OK | NT | NT | NT | |||
| ADC | NA | OK | NT | NT | NT | NT | |||
| LRADC | NT | NT | NT | NT | NT | NT | |||
| HSADC | NT | NT | NT | NT | NT | NT | |||
| PWM | NT | NT | NT | NT | NT | NT | |||
| LCD | OK | NA | OK | NT | NT | NT | |||
| Backlight | OK | OK | OK | NT | NT | NT | |||
| LW700 LCD | OK | NA | KO | LCD is working but some colors are inverted | NT | NT | NT | ||
| MT035 LCD | OK | NA | OK | Timings to adjust | NT | NT | NT | ||
| Touchscreen | NA | OK | OK | NT | NT | NT | |||
| PXP | OK | NA | NT | NT | NT | NT | |||
| Digital Audio | NA | OK | NT | NT | NT | NT | |||
| CAN Bus | NA | NT | NT | NT | NT | NT | |||
| User LED | OK | NT | OK | GPIO_LEDS | NT | NT | NT | GPIOlib | |
| User Button | OK | OK | OK | GPIO_keys, can wakeup the board from standby mode |
NT | NT | NT | GPIOlib | |
| Power Button | OK | NT | OK | OK only when the system is powered by a battery. The board reboots automatically when powered by 5V or USB. That's a chipset feature that cannot be disabled. |
NT | NT | NT | ||
