Difference between revisions of "How to use vanilla kernel on APF28"

Revision as of 11:49, 18 March 2013

By default, the kernel for APF28 is the 2.6.35 version (from Freescale BSP). Migration to Mainline (3.8+) is in progress but not finished, this article explains how to use (test) these kernels with latest armadeus trunk.

Mainline support is done with Device Tree.

Get the trunk version

• Get the latest trunk version with command :

$ git clone git://git.code.sf.net/p/armadeus/code armadeus-trunk

• Configure the view for APF28 :

$ cd armadeus-trunk
$ make apf28_defconfig

• On menuconfig select :

Toolchain  --->
    Kernel Headers (Linux 2.6 (manually specified version))  --->
    (3.8) linux version
...
System configuration  --->
    (ttyAMA0) Port to run a getty (login prompt) on
...
Kernel  --->
    (3.8) Kernel version
    (../patches/linux/$(BR2_LINUX_KERNEL_VERSION)) Custom kernel patches

• Then build :

$ make

U-Boot modification

• Serial port used for console has now a different name: ttyAMA0. So if you want to see something on your serial console please do the following before booting:

BIOS> setenv console console=ttyAMA0,115200n8

• Currently, only NFS boot have been tested:

BIOS> setenv consoledev ttyAMA0
BIOS> run nfsboot

Which devices are supported ?

• APF28_Linux_kernel_status

Roadmap

1. SPI
2. touchscreen