Difference between revisions of "Serial Transfer"
(→Installation) |
(→Usage) |
||
| Line 44: | Line 44: | ||
==Usage== | ==Usage== | ||
| − | {{Warning| You must use minicom as serial terminal and not kermit | + | {{Warning| You must use minicom as serial terminal and not kermit, sorry ! :-(}} |
| − | + | * be sure to have correctly configured Minicom (line speed, 8N1, no flow control, and correct download/upload directories path). | |
After having booted your board: | After having booted your board: | ||
* On your Target, open a new terminal on your serial link (here USB): | * On your Target, open a new terminal on your serial link (here USB): | ||
| Line 53: | Line 53: | ||
* On your Host, launch Minicom and configure it to use ''/dev/ttyUSB1'' at 115200, then connect it to this terminal | * On your Host, launch Minicom and configure it to use ''/dev/ttyUSB1'' at 115200, then connect it to this terminal | ||
* Use '''rz''' for receiving and '''sz''' to send files: | * Use '''rz''' for receiving and '''sz''' to send files: | ||
| − | ===Host --> Target=== | + | ===Host (PC) --> Target (APF)=== |
<pre class="apf"> | <pre class="apf"> | ||
# cd /whereToPutTheFileOnTheTarget/ | # cd /whereToPutTheFileOnTheTarget/ | ||
| Line 62: | Line 62: | ||
Wait a little and your file will be copied to your board rootfs ! ;-) | Wait a little and your file will be copied to your board rootfs ! ;-) | ||
| − | ===Target --> Host=== | + | ===Target (APF) --> Host (PC)=== |
<pre class="apf"> | <pre class="apf"> | ||
# cd /whereIsTheFileToSendOnTheTarget/ | # cd /whereIsTheFileToSendOnTheTarget/ | ||
Revision as of 16:48, 4 March 2013
Instructions to use the serial port of your Armadeus board to transfer files from/to your PC.
 |
Note: This page explains how to transfer files on the board when the Linux system has started, not from U-Boot !.
To know how to configure serial link for U-Boot communication, it's here. |
Contents
Introduction
When you only have a serial link (RS232/USB) as connection with your devt PC (ie no Ethernet available), then you can use Zmodem protocol to send/receive files to/from your Shell/Console of your Armadeus board.
Installation
Target (APF)
Modify your Buildroot configuration:
$ make menuconfig
to add lrzsz package:
[*] lrzsz
and then rebuild your rootfs:
$ make
Reflash it or manually copy rz and sz executables found in $ARMADEUS_ROOTFS_DIR/usr/bin/.
Host
- Install lrzsz package, if not already installed on your system. For example on Ubuntu/Debian:
$ sudo apt-get install lrzsz
- Install minicom tool:
$ sudo apt-get install minicom
- The first time, configure minicom (as root):
$ sudo minicom -s
Usage
 |
Warning: You must use minicom as serial terminal and not kermit, sorry ! :-( |
- be sure to have correctly configured Minicom (line speed, 8N1, no flow control, and correct download/upload directories path).
After having booted your board:
- On your Target, open a new terminal on your serial link (here USB):
# /sbin/getty -L ttygserial 115200 vt100
- On your Host, launch Minicom and configure it to use /dev/ttyUSB1 at 115200, then connect it to this terminal
- Use rz for receiving and sz to send files:
Host (PC) --> Target (APF)
# cd /whereToPutTheFileOnTheTarget/ # rz -bZ .. waiting to receive.
then in minicom do: Ctrl+A , s and choose zmodem protocol and the file to send.
Wait a little and your file will be copied to your board rootfs ! ;-)
Target (APF) --> Host (PC)
# cd /whereIsTheFileToSendOnTheTarget/ # sz -b --zmodem filename
Minicom handles the file receiving automatically (and put it in your $HOME by default)
