Difference between revisions of "Minicom"
From ArmadeusWiki
(→Send file) |
|||
| Line 1: | Line 1: | ||
| + | [[Category: terminal]] | ||
| + | |||
Minicom is a serial line terminal emulator that allows you to take control of your board through the RS232 line. With it you can have access to the U-Boot/Linux console of your APF without needing to connect a keyboard/screen to the board. ([http://tldp.org/HOWTO/Remote-Serial-Console-HOWTO/ For more informations on remote console]) | Minicom is a serial line terminal emulator that allows you to take control of your board through the RS232 line. With it you can have access to the U-Boot/Linux console of your APF without needing to connect a keyboard/screen to the board. ([http://tldp.org/HOWTO/Remote-Serial-Console-HOWTO/ For more informations on remote console]) | ||
Revision as of 09:00, 28 September 2015
Minicom is a serial line terminal emulator that allows you to take control of your board through the RS232 line. With it you can have access to the U-Boot/Linux console of your APF without needing to connect a keyboard/screen to the board. (For more informations on remote console)
Contents
Installation
On *Ubuntu / Debian
$ sudo apt-get install minicom
or use your system's graphical package manager.
On Fedora
# rpm -q ???
Configuration
$ minicom -s
- Choose serial port name, parameters (8N1) and no hardware handshake
- Save config as default
Usage
- To launch it (-o to not send modem AT init sequence):
$ minicom -o
- To switch from terminal mode to command mode:
CTRL + a then z
- To quit:
Switch in command mode q
Send file
When you are connected on apf running Linux:
- Open minicom menu
C-A + s
- Choose zmodem
- Select your file to download with space-key
- launch transfert with enter
Usefull tips
- TBDL
