Difference between revisions of "ISE WebPack installation on Linux"
From ArmadeusWiki
(→Installation guide for debian Wheezy and ISE 14.6) |
(→Installation guide for debian Wheezy and ISE 14.6) |
||
| Line 42: | Line 42: | ||
<pre class="host"> | <pre class="host"> | ||
| − | sudo apt-get install libstdc++5 libxp6 libcurl3 | + | sudo apt-get install libstdc++5 libxp6 libcurl3 libmotif4 |
</pre> | </pre> | ||
Revision as of 16:03, 4 July 2013
Contents
Xilinx WebPack installation instructions for Linux Ubuntu (6.10) with ISE 10.1.
 |
Note: Tested on:
|
Packages needed
Install following package before installing ISE:
$ sudo apt-get install libstdc++5 libmotif3 libxp6 libcurl3
Instructions
| |
Note: On new version of ISE webpack tcl console is not activated by default. To use it check the menu View->Panels->Tcl Console |
- download ISE WebPACK - WebInstall / ISE WebPACK 10.1 (Free Download) archive from here. You will need to create a Xilinx's account and register before being able to download files (it's free).
- Choose the full download version "Download Files Individually" (2,4 Gbytes). When asked, you are not obliged to accept Java download manager (if you are sure of your Internet connection quality). Note the registration ID, it will be asked later during installation.
- You will get a webpack_SFD.tar archive, save it in your $HOME dir
- unzip the archive:
$ cd $HOME $ tar xvf webpack_SFD.tar
- launch the installation
$ cd webpack $ ./setup
- Follows the instructions of the graphical interface (you need to launch setup as root if you want to install JTAG tools but on Armadeus JTAG tools are not needed to program the FPGA):
Installation guide for debian Wheezy and ISE 14.6
- Following package must be installed :
sudo apt-get install libstdc++5 libxp6 libcurl3 libmotif4
Links
- http://www.xilinx.com/ise/logic_design_prod/webpack.htm
- Good french tutorial : http://harded.free.fr/site/?p=55
