Difference between revisions of "APF6 Linux kernel status"
From ArmadeusWiki
(→APF6 module) |
|||
Line 1: | Line 1: | ||
[[Category: kernel]] | [[Category: kernel]] | ||
+ | [[Category: APF6]] | ||
The [[APF6]] Linux distribution can be found here: [http://sourceforge.net/project/showfiles.php?group_id=122057&package_id=133240 latest stable installation tarball from SourceForge] | The [[APF6]] Linux distribution can be found here: [http://sourceforge.net/project/showfiles.php?group_id=122057&package_id=133240 latest stable installation tarball from SourceForge] | ||
Revision as of 08:31, 12 February 2015
The APF6 Linux distribution can be found here: latest stable installation tarball from SourceForge
Current version
Currently (armadeus-6.0-devt) default supported Linux version for APF6 is: 3.18.
Details concerning the drivers usage can be found below.
- NT = Not Tested
- NA = Not Available / Not possible
APF6 module
3.18 | ||||
Driver | Compiling ? Static / Module |
Working ? | Comments | |
---|---|---|---|---|
eMMC | OK | NT | OK | |
SPI | OK | NT | NT | SPI / Not tested yet. |
I2C | OK | NT | OK | I2C |
Keypad | NT | NT | NT | Not tested yet |
MMC/SD/SDIO | OK | NT | OK | |
UART | OK | NT | OK | |
Ethernet | OK | NT | OK | |
USB OTG | OK | NT | OK | USB |
USB HOST1 | OK | NT | OK | USB |
PWM | OK | NT | OK | PWM |
RTC | OK | NT | OK | RTC |
Watchdog | OK | NT | OK | Watchdog |
PM sleep/wakeup | OK | NT | OK | Power management |
Frequency scaling | OK | NT | NT | Not tested yet |
CSI (Camera) | OK | NT | OK | Tested with a wandcam and SDL capture demo. |
SSI (Audio) | OK | NT | OK | ALSA |
Video codec (H.263/4) | NT | NT | NT | Not tested yet |
Security/Sahara/RTIC | NT | NT | NT | Not tested yet |
Wi-Fi (b/g) | OK | OK | OK | Wifi - Wl12xx_driver |
Bluetooth | OK | OK | OK | Bluetooth / No RTS/CTS Bluetooth |
FPGA POD interface | NT | NT | NT | Not tested yet |
FPGA loading | OK | NT | OK | Only available on APF6SP |
Xenomai | OK | NT | NT | Kernel 3.10.18. |
APF6Dev development baseboard
- NT = Not Tested
- NA = Not Available / Not possible
3.18-rc5 | ||||
Driver | Compiling ? Static / Module |
Working ? | Comments | |
---|---|---|---|---|
SATA | OK | NT | OK | |
PCIe | OK | NT | OK | |
microSD | OK | NT | OK | |
Ethernet | OK | NT | ~OK | 100M only at the moment |
LCD | OK | NT | OK | LCD |
Backlight | NT | NT | NT | Not tested yet |
Audio out | OK | NT | OK | ALSA |
Audio in | OK | NT | OK | ALSA |
Touchscreen | OK | OK | OK | Single touch only. |
USB Host 1 | OK | NT | OK | High Speed |
CAN Bus | OK | OK | OK | CAN_bus_Linux_driver |
HDMI | OK | NT | OK | Issues with some DVI monitor. |
GPS | OK | NT | OK | GPS |
GSM / 3G | OK | NT | OK | Gsm |
GPIO | OK | NT | OK | GPIOlib |
User LED | OK | NT | OK | GPIO LEDS |
User button | OK | NT | OK | GPIO keys |
RTC MCP79400 | NT | OK | OK | RTC. Timekeeping only. |