Difference between revisions of "Quartus installation on Linux"
From ArmadeusWiki
(→configure .bashrc) |
m (→Links) |
||
| Line 55: | Line 55: | ||
== Links == | == Links == | ||
| − | * [http://www.alterawiki.com/wiki/Quartus_for_Debian_Wheezy Installation guide for | + | * [http://www.alterawiki.com/wiki/Quartus_for_Debian_Wheezy Installation guide for Debian on Altera's official wiki] |
* [http://www.alterawiki.com/wiki/Main_Page Altera wiki] | * [http://www.alterawiki.com/wiki/Main_Page Altera wiki] | ||
* [http://www.alteraforum.com/ Altera forum] | * [http://www.alteraforum.com/ Altera forum] | ||
Revision as of 12:53, 24 December 2014
Contents
Introduction
Quartus web edition is the software used to synthesize bitstream for Altera FPGAs. It's required for the cyclone V soldered on APF6SP.
Installation guide
Package needed
On debian jessie :
sudo apt-get install libstdc++5 libmotif4 libxp6 libcurl3
Download
Download the big (4GB) quartus installer here (Use "download software web edition" button).
Uncompress and install
- Untar the archive :
tar -xvf Quartus-web-14.0.0.200-linux.tar
- run the installer:
bash setup.sh
- follow the instructions to install it where you want.
configure .bashrc
Adding the path of your quartus in ~/.bashrc
export ALTERAPATH="/opt/quartus/altera/14.0/"
export ALTERAOCLSDKROOT="${ALTERAPATH}/hld"
export QUARTUS_ROOTDIR=${ALTERAPATH}/quartus
export QUARTUS_ROOTDIR_OVERRIDE="$QUARTUS_ROOTDIR"
export PATH=$PATH:${ALTERAPATH}/quartus/bin
export PATH=$PATH:${ALTERAPATH}/nios2eds/bin
export PATH=$PATH:${ALTERAPATH}/modelsim_ase/bin
Launch Quartus
To launch quartus, open a terminal and simply type :
$ quartus
