Difference between revisions of "APF6"

Revision as of 08:30, 12 February 2015

Description

The APF6 is a high-end Single Board Computer targeted for advanced GUI, intensive computation and extended connectivity.

Here is a list of the main features:

• Processor: i.MX6 (single, dual or quad core Cortex-A9 @ up to 1GHz)
• RAM: DDR3 1066MHz. 512Mbytes to 2GBytes. 32 ot 64bits data bus. Default capacity will be 512Mbytes.
• Flash: eMMC 4Gbytes, 8 bits data bus.
• Ethernet: onboard Physical (ready to use Ethernet 10/100/1000Mbit link)
• USB: High speed USB OTG (OnTheGo) with onboard Physical (ready to use USB OTG link)
• USB: High speed Host with integrated PHY
• PCIexpress Gen2
• SATA II
• DVI output
• TFT CMOS/LVDS interface
• WiFi (option): b/g/n with u.FL antenna
• Bluetooth (option): BT 4.0
• Only one external supply of 3.3V required.
• Mechanical dimensions: 60x50mm

All the i.MX6 peripherals can be accessed through two high density Hirose connectors.

Note for APF6 boards

For compatibility reasons with the APF6x_SP the PCIe support has been activated on U-Boot. A warning message appears during the boot startup indicating:

WARNING: Make sure the PCIe #PERST line is connected

Do not take care of it if you don't use PCIe commands from uboot.

Resources

• Datasheet and schematics

Feature list

• APF6_Linux_kernel_status

Development boards

• APF6Dev