Difference between revisions of "APF6Dev"
From ArmadeusWiki
(→Feature list) |
m (→Feature list) |
||
| Line 75: | Line 75: | ||
|} | |} | ||
| + | ==Tips== | ||
* Using 7" 800x480 LCD with 3.10 legacy kernel: | * Using 7" 800x480 LCD with 3.10 legacy kernel: | ||
<pre class="apf"> | <pre class="apf"> | ||
| Line 89: | Line 90: | ||
keyboard map is english one and it seems not possible to change it (U-Boot 2014.07) ? | keyboard map is english one and it seems not possible to change it (U-Boot 2014.07) ? | ||
| − | * to activate login in Framebuffer console, please uncomment /etc/inittab line 35 this way: | + | * to activate login in Framebuffer console, please uncomment ''/etc/inittab'' line 35 this way: |
<pre class="apf"> | <pre class="apf"> | ||
# Set up a getty on LCD | # Set up a getty on LCD | ||
Revision as of 14:32, 18 February 2016
Contents
Description
This is the Armadeus System's standard development board/baseboard for the APF6 module.
The following options are available:
Errata
- As the board is also used for APF6_SP module (APF6+FPGA), you might experience some miscellaneous FPGA LED blinking (beside "FPGA_SW" button) when no FPGA is present.
Resources
Feature list
Audio
Video OutVideo In |
User InputWired communicationStorage |
Realtime clockWireless communicationFPGA connectionsOther |
Tips
- Using 7" 800x480 LCD with 3.10 legacy kernel:
BIOS> setenv extrabootargs video=mxcfb0:dev=lcd,800x480@60,if=RGB666,bpp=32
- Activating HDMI console with USB keyboard in U-Boot (since armadeus-6.0):
BIOS> usb start BIOS> setenv stdout serial,vga BIOS> setenv stderr serial,vga BIOS> setenv stdin serial,usbkbd
keyboard map is english one and it seems not possible to change it (U-Boot 2014.07) ?
- to activate login in Framebuffer console, please uncomment /etc/inittab line 35 this way:
# Set up a getty on LCD tty1::respawn:/sbin/getty 38400 tty1
