Difference between revisions of "OPOS6ULDev"
From ArmadeusWiki
(→Connectors) |
(→Connectors) |
||
| Line 70: | Line 70: | ||
| || || || SCL1 || I2C clock || style="color:yellow;background:black;" align=center | '''5''' || style="color:yellow;background:black;" align=center | '''6''' || GND || || || || | | || || || SCL1 || I2C clock || style="color:yellow;background:black;" align=center | '''5''' || style="color:yellow;background:black;" align=center | '''6''' || GND || || || || | ||
|- | |- | ||
| − | | || || || GPIO7 || GPIO|| style="color:yellow;background:black;" align=center | '''7''' || style="color:yellow;background:black;" align=center | '''8''' || UART Tx || TxD || || || | + | | || gpio10 || GPIO1_IO09__GPIO1_IO09 || GPIO7 || GPIO|| style="color:yellow;background:black;" align=center | '''7''' || style="color:yellow;background:black;" align=center | '''8''' || UART Tx || TxD || || || |
|- | |- | ||
| || || || || GND|| style="color:yellow;background:black;" align=center | '''9''' || style="color:yellow;background:black;" align=center | '''10''' || UART Rx || RxD || || || | | || || || || GND|| style="color:yellow;background:black;" align=center | '''9''' || style="color:yellow;background:black;" align=center | '''10''' || UART Rx || RxD || || || | ||
Revision as of 17:09, 28 October 2016
Contents
Description
This is the Armadeus System's standard development board/baseboard for the OPOS6UL module.
Errata
Resources
Feature list
AudioVideo OutVideo In |
User InputWired communicationStorage |
Wireless communicationOther |
Connectors
- RPi compatible connector:
| xxx | Linux | i.M6UL Mux | RPi name | Function | JX Pin | JX Pin | Function | RPi name | Function | Function | Function |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3.3V | 1 | 2 | 5V | ||||||||
| SDA1 | I2C data | 3 | 4 | 5V | |||||||
| SCL1 | I2C clock | 5 | 6 | GND | |||||||
| gpio10 | GPIO1_IO09__GPIO1_IO09 | GPIO7 | GPIO | 7 | 8 | UART Tx | TxD | ||||
| GND | 9 | 10 | UART Rx | RxD | |||||||
| gpio24 | UART3_RX_DATA__GPIO1_IO25 | GPIO0 | GPIO | 11 | 12 | GPIO | GPIO1 | ||||
| GPIO2 | GPIO | 13 | 14 | GND | |||||||
| GPIO3 | GPIO | 15 | 16 | GPIO | GPIO4 | ||||||
| 3,3V | 17 | 18 | GPIO | GPIO5 | |||||||
| SPI MOSI | 19 | 20 | GND | ||||||||
| SPI MISO | 21 | 22 | GPIO | GPIO6 | NAND_WE_B__GPIO4_IO01 | gpio97 | |||||
| SPI CLK | 23 | 24 | SPI_CS0 | ||||||||
| GND | 25 | 26 | SPI_CS1 | ||||||||
| I2C Data | 27 | 28 | I2C clock | ||||||||
| GPIO | 29 | 30 | GND | ||||||||
| GPIO | 31 | 32 | GPIO | ||||||||
| GPIO | 33 | 34 | GND | ||||||||
| GPIO | 35 | 36 | GPIO | ||||||||
| GPIO | 37 | 38 | GPIO | ||||||||
| GND | 39 | 40 | GPIO |
Tested RPi shields/hats
Tips
Bootstrap
- Put Boot0 jumper to go in Bootstrap mode
Linux
- to activate login in Framebuffer console, please uncomment /etc/inittab line 35 this way:
# Set up a getty on LCD tty1::respawn:/sbin/getty 38400 tty1
RaspberryPi is a registered trademark of RaspberryPi Foundation.
