Difference between revisions of "FuseSoC"
From ArmadeusWiki
(→Blinky) |
(→Blinky) |
||
| Line 46: | Line 46: | ||
</pre> | </pre> | ||
| − | + | === APF27 === | |
| + | |||
| + | * If you have [[ISE_WebPack_installation_on_Linux|ISE installed correctly]], you can synthesize blinky with following command: | ||
<pre class="host"> | <pre class="host"> | ||
$ fusesoc run --target=apf27 fusesoc:utils:blinky | $ fusesoc run --target=apf27 fusesoc:utils:blinky | ||
</pre> | </pre> | ||
| − | * OPOS6UL_SP: | + | |
| + | * The bitstream will be generated in : | ||
| + | <pre class="host"> | ||
| + | ./build/fusesoc_utils_blinky_1.0/apf27-ise/blinky.bit | ||
| + | </pre> | ||
| + | |||
| + | * To configure the FPGA, copy it under your /tftpboot/ directory then download it with U-Boot: | ||
| + | <pre class="host"> | ||
| + | cp ./build/fusesoc_utils_blinky_1.0/apf27-ise/blinky.bit /tftpboot/ | ||
| + | </pre> | ||
| + | * Under U-Boot | ||
| + | <pre class="apf"> | ||
| + | BIOS> tftpboot blinky.bit | ||
| + | BIOS> fpga load 0 ${loadaddr} ${filesize} | ||
| + | </pre> | ||
| + | |||
| + | === OPOS6UL_SP === | ||
| + | |||
| + | * If you have ISE installed correctly, you can synthesize blinky with following command: | ||
<pre>TODO</pre> | <pre>TODO</pre> | ||
Revision as of 13:54, 22 July 2020
Page under construction...
Informations on this page are not guaranteed !!
Introduction
FuseSoC is a package manager written in python and used to assemble different HDL design from libraries together. FuseSoC is like Buildroot or Yocto used for Linux, it's just a «Makefile» that launch different tools to build the system.
Install fusesoc
- Fusesoc is a python3 package that can be installed with pip :
$ python3 -m pip install fusesoc
- To be up to date use --upgrade option:
$ python3 -m pip install --upgrade fusesoc
- Once installed a command named fusesoc is available on system :
$ fusesoc --version 1.11.0
- Initialize library:
$ cd workspace $ fusesoc init
Blinky
Blinky is a project that aim do blink all FPGA board with a gateware constructed from fusesoc tool.
Here the way to blink Armadeus board with blinky.
First, git clone the blinky project:
$ cd workspace $ fusesoc library add --sync-type git blinky https://github.com/fusesoc/blinky
APF27
- If you have ISE installed correctly, you can synthesize blinky with following command:
$ fusesoc run --target=apf27 fusesoc:utils:blinky
- The bitstream will be generated in :
./build/fusesoc_utils_blinky_1.0/apf27-ise/blinky.bit
- To configure the FPGA, copy it under your /tftpboot/ directory then download it with U-Boot:
cp ./build/fusesoc_utils_blinky_1.0/apf27-ise/blinky.bit /tftpboot/
- Under U-Boot
BIOS> tftpboot blinky.bit
BIOS> fpga load 0 ${loadaddr} ${filesize}
OPOS6UL_SP
- If you have ISE installed correctly, you can synthesize blinky with following command:
TODO
