Difference between revisions of "MMC/SD"
From ArmadeusWiki
(→MMC) |
(→Supported Cards) |
||
| Line 34: | Line 34: | ||
===MMC=== | ===MMC=== | ||
* Hama 256Mo -> OK | * Hama 256Mo -> OK | ||
| − | * Kingston 256Mo | + | |
| + | ===MMC+=== | ||
| + | * Kingston 256Mo -> OK | ||
===SD:=== | ===SD:=== | ||
Revision as of 12:35, 18 February 2007
How-To connect an MMC/SD adapter to the APF9328 (through DevLight board)
For instructions on how to use MMC/SD on Linux, see MultiMediaCard page.
Contents
Adapter board
We have designed a small adapter board with an MMC/SD connector on it. You need to connect the signals listed in the table below to the APF9328DevLight board one. The WP and CD_SW signals are optional and must be connected to free IOs if used.
Top view:
| Adapter Pin | Desc | Adapter Pin | Desc |
| 1 | +3.3V | 2 | SD_DAT2 |
| 3 | SD_CMD | 4 | SD_DAT3 |
| 5 | SD_CLK | 6 | SD_DAT0 |
| 7 | WP | 8 | SD_DAT1 |
| 9 | CD_SW | 10 | GND |
Remarks:
- Pin 1 (rectangular pad)
- WP: write protect
- CD_SW: Card Detect switch
Supported Cards
Here is a list of the current cards which were tested:
MMC
- Hama 256Mo -> OK
MMC+
- Kingston 256Mo -> OK
SD:
- Kingston 512Mo -> need more perf tests but seems to work
- Kingston 256Mo -> OK
miniSD:
uSD/Transflash:
- Sandisk 512Mo -> recognised but data tranfer is failing
