Difference between revisions of "Linux 2.6.23 integration"

From ArmadeusWiki
Jump to: navigation, search
(Generic)
Line 1: Line 1:
 
==Generic==
 
==Generic==
 
* in in drivers/i2c/busses/i2c-imx.h line 338, remove __init in void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info) otherwise kernel gives compilation warning with overlapping (??) symbols
 
* in in drivers/i2c/busses/i2c-imx.h line 338, remove __init in void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info) otherwise kernel gives compilation warning with overlapping (??) symbols
 +
* in arch/arm/mach-imx/apf9328.c line 28, config.h doesn't exist anymore
  
 
==Serial==
 
==Serial==

Revision as of 19:41, 21 October 2007

Generic

  • in in drivers/i2c/busses/i2c-imx.h line 338, remove __init in void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info) otherwise kernel gives compilation warning with overlapping (??) symbols
  • in arch/arm/mach-imx/apf9328.c line 28, config.h doesn't exist anymore

Serial

  • Serial registers Macros (like UFCR()) have been moved from imx-regs.h -> imx serial driver C file. So in apf9328.c we should remove these lines:
    // Serial
   UFCR(IMX_UART1_BASE) = 0xa81;
   UFCR(IMX_UART2_BASE) = 0xa81;

I2C

  • in drivers/i2c/busses/i2c-imx.c, SA_INTERRUPT is now obsolete and should be replaced by IRQF_DISABLED in request_irq() (line 575)
  • in drivers/i2c/busses/i2c-imx.h line 63, replace #define I2C_IMX_DEFAULT_CLKDIV 0x0f with #define I2C_IMX_DEFAULT_CLKDIV 16 otherwise it's giving error in driver compilation
  • in drivers/i2c/busses/i2c-imx.h line 104, struct i2c_algorithm doesn't have slave_send nor slave_recv anymore
  • in drivers/mtd/maps/apf9328.c line 28, consistent_sync() should be replaced by flush_ioremap_region() otherwise kernel is crashing

RTC

  • in drivers/rtc/rtc-ds1374.c line 59 dev_dbg(&client->dev, "%s: raw read data... should be commented otherwise not compiling