Difference between revisions of "QEMU"
From ArmadeusWiki
m (→Launch it) |
(→Get/generate simulation images) |
||
| Line 10: | Line 10: | ||
==Get/generate simulation images== | ==Get/generate simulation images== | ||
| + | * In our tests we used the QEMU Versatile PB emulated hardware. To get a compatible Linux kernel for this board then: | ||
| + | [armadeus]$ wget http://people.debian.org/~aurel32/arm-versatile/vmlinuz-2.6.18-5-versatile | ||
| + | * Generate your Armadeus Rootfs as an EXT2 image, and zip it: | ||
| + | [aramdeus]$ gzip -9 buildroot/rootfs.arm_nofpu.ext2 | ||
==Launch it== | ==Launch it== | ||
Revision as of 17:22, 27 October 2007
UNDER CONSTRUCTION
Well, you don't have enough money to buy an Armadeus board and just want to be part of the "Software" side of the project ? Then QEMU can be a good choice for you !!
Just be aware that currently Armadeus hardware is not emulated under QEMU, we are just using an other board hard and linux kernel to launch our Rootfs an test our software which is not custom hardware related (ie User interface, Network, etc...)
Installation
- on Debian just do a:
[armadeus]$ sudo apt-get install qemu
Get/generate simulation images
- In our tests we used the QEMU Versatile PB emulated hardware. To get a compatible Linux kernel for this board then:
[armadeus]$ wget http://people.debian.org/~aurel32/arm-versatile/vmlinuz-2.6.18-5-versatile
- Generate your Armadeus Rootfs as an EXT2 image, and zip it:
[aramdeus]$ gzip -9 buildroot/rootfs.arm_nofpu.ext2
Launch it
[armadeus]$ qemu-system-arm -m 16 -kernel /home/jboibessot/qemu/zImage.integrator -nographic \
-hda /..../system/buildroot/rootfs.arm_nofpu.ext2 -append "console=ttyAMA0 root=/dev/hda1" ????
