Difference between revisions of "Communicate"
From ArmadeusWiki
m (→Connection Setup) |
(→Forewords) |
||
| Line 3: | Line 3: | ||
==Forewords== | ==Forewords== | ||
The default connection uses a simple RS232 link (Null-Modem cable). <br> | The default connection uses a simple RS232 link (Null-Modem cable). <br> | ||
| − | If you want to tranfer data | + | If you want to tranfer data in a faster way, the Ethernet link is recommended.<br> |
| − | At this stage, you should have something like that:<br> | + | At this stage, you should have something looking like that:<br> |
[[Image:BoardConnection.png]] | [[Image:BoardConnection.png]] | ||
Revision as of 19:50, 15 May 2008
How-To connect your Armadeus board to your development Host.
Forewords
The default connection uses a simple RS232 link (Null-Modem cable).
If you want to tranfer data in a faster way, the Ethernet link is recommended.
At this stage, you should have something looking like that:
Connection Setup
A Terminal emulator (for RS232 link) and a TFTP server (for Ethernet link) have to be configured, depending on your Host operating system:
Linux
Connection with U-Boot on Linux
Window$
Connection with U-Boot on Window$
U-Boot communication
- Verify that your RS232 cable is correctly connected
- The bootstrap jumper must be removed
- Start the RS232 terminal on the Host side
- Reset the board
- U-Boot must start
Here is a screenshot of what you will see on your Terminal emulator during the Linux boot.
