Difference between revisions of "OpenCore 16550 IP Linux driver"
From ArmadeusWiki
m (→Usage) |
m (→Usage) |
||
Line 9: | Line 9: | ||
==Usage== | ==Usage== | ||
+ | Assuming you have previously loaded your FPGA with the corresponding IP: | ||
# modprobe 8250 | # modprobe 8250 | ||
# modprobe 16550_ocore | # modprobe 16550_ocore | ||
Now you should have as much /dev/ttySN as IPs you put in your bitfile. | Now you should have as much /dev/ttySN as IPs you put in your bitfile. |
Revision as of 18:43, 24 July 2008
Page under construction... Informations on this page are not guaranteed !!
Compilation
$ make menuconfig
Device Drivers ---> Armadeus specific drivers ---> FPGA Drivers ---> <M> OpenCore 16550 serial IP driver
$ make linux
Usage
Assuming you have previously loaded your FPGA with the corresponding IP:
# modprobe 8250 # modprobe 16550_ocore
Now you should have as much /dev/ttySN as IPs you put in your bitfile.